China Hot selling Chinese Manufacturer of Steel Ring Forging for Feed Machines with high quality

Product Description

Chinese manufacturer of Steel Ring Forging for Feed Machines


Product Description

The forged ring for feed machine pallet mill.

1.Forged SHAFT,forged RING;forged BLOCK;forged FLANGE.
Pipe sheet,gear ring,slewing bearing ring…most of forging parts.
Forged steel flanges/carbon steel flanges/stainless steel flanges.
2.Material: 4130, 4140, 4317, 4142, 4340, UNS440, 34CrNi3Mo,25Cr2Ni4MOV,18CrNiMo5, 30CrMo, 9Cr2Mo, 9Cr2W, 9Cr3Mo, 60CrMoV etc.

3.Dual certified to ASME/ASTM SA/A182 and EN15712-5 or DIN17440 

4.PED-AD 2000-Merkblatt W0



Forging Product Size Range
Forgings Raw Material Min.Size            (mm) Max.Size                            (mm) Min.Weight (kgs) Max.Weight   (kgs) Heat Treatment
Shaft Carbon steel 
Stainless Steel 
Alloy Steel
Φ30×50 Φ800×5000 0.3 20000 Normalizing;
Tempering Annealing;
Quenching&High Temperature Tempering
Ring Φ75 ×Φ15×12 Φ5000 ×Φ4500×300 0.3 9000
Disc Φ90 ×20 Φ3500 ×100 0.5 10000
Block 100 ×100×100 1500 ×1500×1500 7.85 26000
Gear Ring Φ75 ×Φ15×12 Φ5000 ×Φ4500×300 0.3 9000
Hollow Bar Φ90 ×Φ49×133 Φ1000 ×Φ900×3000 4 12000
Other   Φ5000   30000

Company Profile

ZheJiang Xihu (West Lake) Dis.huang Wind Power Flange Manufacturing Co., Ltd. is located in HangZhouang County, HangZhou City, ZheJiang Province, the hometown of forging in China. Since 2007, it has been focusing on manufacturing and selling various steel flange forgings, and its products are exported to all over the country. More than 100 countries and regions around the world. HangZhouang’s complete forging processing industry chain and complete testing equipment support, so that we can almost meet the requirements of various forging products of customers.

1. The modern factory covers an area of more than 20,000 square meters, has more than 30 sets of forging processing and testing equipment, a three-dimensional inspection center, ISO9001:2015 factory system certification, TUV/PED 2014/68/EU pressure vessel manufacturing license, special equipment manufacturing certificate, Member of China Forging Association, member of ASTM International Organization, high-tech enterprise in HangZhouang County, etc.

2. Can produce flanges of various international and domestic standards and custom flanges with drawings: GB, American, ANSI, Japanese, JIS, German, DIN, British, BS, European, EN1092, Russian, GOST, etc.

3. Types of flanges that can be produced: weld neck flange, high neck flange, long high neck flange, threaded flange, loose flange, lap flange, blind flange, flat flange, looper Flanges, orifice flanges, wind power flanges, heat exchanger tube sheets, baffles, pressure vessel nozzles, connectors, etc.;

Forging types: various forging flanges, forging tubes, Tube Sheet, Tube bundle supporting plate, raffles, forging rings, forging rings, forging rods, forging shafts, forging cakes, thick-walled tubes, shafts, wheels, valve bodies, gears, nozzles, modules, oil cylinders, rings, various special-shaped forging, etc.;

Our company’s forging series products include
Industrial forgings for civil industries such as machine tool manufacturing, agricultural machinery, farm implement manufacturing and bearing industry;
Shaft segments such as main shaft and intermediate shaft for hydro-generators, forgings for thermal power plants such as rotors, impellers, and retaining ring main shafts;
Forgings for metallurgical machinery such as rolls and gear shafts; forgings for kettle ring, cylinder, cylinder, and axle forging machinery;
Flange series products include pressure vessel flanges, heat exchanger flanges, flat welding flanges, butt welding flanges, non-standard flanges, stainless steel flanges, etc.
Widely used in chemical, construction, water supply, drainage, petroleum, light and heavy industry, refrigeration, sanitation, plumbing, fire protection, electric power, aerospace, shipbuilding and other basic projects.

4. Basic size range of processed products as shown in the pictures below;

5. Quality inspection and inspection reports that can be issued by our products: according to the specific requirements of customers, we can issue certificates of conformity, non-destructive testing, 3.1 certificates, 3.2 certificates, mechanical properties, chemical composition, radiographic inspection, certificate of origin, etc.;

6. Standard exportation Package, plywood cases or pallets or iron frame.  

7. [Common materials]: Stainless steel: ASTM, A182, F304/304L, F316/316L, F316H, F310, F321, JB4728-2000, OCR18Ni10Ti, JB4728-2000, OCR17NI12Mo2, 2205, 2507, 2103, 904L, 254SMD, 304 , 316LN, 1CR13, 2cr13, 3cr13, 4cr13, 321, 302, W1813N, W2014N, W2018N, W2571N, P550, Cr18Mn18N and other forgings.

Heat-resistant steel: 12CrlMoVG, P11, P22, P91, P92, F92, InconeI740H, CCA617, Sanicro25 alloy and other forgings

Bearing steel: G20CrNiMoA, G2CrNi2MoA, G20Cr2Ni4, GCr15, GCr15SiMn, GCr15SiMo, GCr18Mo, M50, M50NiL, CSS-F42L, Cronidur30 and other forgings

Gear steel: 42CrMo, 20CrNi2Mo, 34CrNi3Mo, 40CrNiMo, 20CrMnMo, 35CrMo, 18CrNiMo7-6 and other forgings.

7. Industries involved: mining equipment: mining equipment, winch equipment, crushing equipment, grinding equipment, washing equipment, sintering equipment.

Petrochemical equipment: manholes and flanges of spherical storage tanks, various tube sheets required for heat exchangers, integrally forged cylinders (pressure vessels) of catalytic cracking reactors with butt welding flanges, cylinders used in hydrogenation reactors Section, the top cover, bottom cover, head, etc. required by the fertilizer equipment are all forgings.

Power machinery, diesel generators, engines, electric machinery;

Mechanical parts such as wind power, nuclear power, marine, weapons, aircraft, etc.;

In line with the enterprise spirit of “integrity, dedication, collaboration, innovation, and people-oriented”, the company has been deeply involved in the manufacturing industry with its advanced business philosophy, professional technical support, pragmatic work attitude and meticulous service, and has won the recognition of customers and Market reputation.

If you are interested in our company’s products and services, we look forward to your online message or inquiries.

Screw Shaft Types and Uses

Various uses for the screw shaft are numerous. Its major diameter is the most significant characteristic, while other aspects include material and function are important. Let us explore these topics in more detail. There are many different types of screw shafts, which include bronze, brass, titanium, and stainless steel. Read on to learn about the most common types. Listed below are some of the most common uses for a screw shaft. These include: C-clamps, screw jacks, vises, and more.

Major diameter of a screw shaft

A screw’s major diameter is measured in fractions of an inch. This measurement is commonly found on the screw label. A screw with a major diameter less than 1/4″ is labeled #0 to #14; those with a larger diameter are labeled fractions of an inch in a corresponding decimal scale. The length of a screw, also known as the shaft, is another measure used for the screw.
The major diameter of a screw shaft is the greater of its 2 outer diameters. When determining the major diameter of a screw, use a caliper, micrometer, or steel rule to make an accurate measurement. Generally, the first number in the thread designation refers to the major diameter. Therefore, if a screw has a thread of 1/2-10 Acme, the major diameter of the thread is.500 inches. The major diameter of the screw shaft will be smaller or larger than the original diameter, so it’s a good idea to measure the section of the screw that’s least used.
Another important measurement is the pitch. This measures the distance between 1 thread’s tip and the next thread’s corresponding point. Pitch is an important measurement because it refers to the distance a screw will advance in 1 turn. While lead and pitch are 2 separate concepts, they are often used interchangeably. As such, it’s important to know how to use them properly. This will make it easier to understand how to select the correct screw.
There are 3 different types of threads. The UTS and ISO metric threads are similar, but their common values for Dmaj and Pmaj are different. A screw’s major diameter is the largest diameter, while the minor diameter is the lowest. A nut’s major diameter, or the minor diameter, is also called the nut’s inside diameter. A bolt’s major diameter and minor diameter are measured with go/no-go gauges or by using an optical comparator.
The British Association and American Society of Mechanical Engineers standardized screw threads in the 1840s. A standard named “British Standard Whitworth” became a common standard for screw threads in the United States through the 1860s. In 1864, William Sellers proposed a new standard that simplified the Whitworth thread and had a 55 degree angle at the tip. Both standards were widely accepted. The major diameter of a screw shaft can vary from 1 manufacturer to another, so it’s important to know what size screw you’re looking for.
In addition to the thread angle, a screw’s major diameter determines the features it has and how it should be used. A screw’s point, or “thread”, is usually spiky and used to drill into an object. A flat tipped screw, on the other hand, is flat and requires a pre-drilled hole for installation. Finally, the diameter of a screw bolt is determined by the major and minor diameters.

Material of a screw shaft

A screw shaft is a piece of machine equipment used to move raw materials. The screw shaft typically comprises a raw material w. For a particular screw to function correctly, the raw material must be sized properly. In general, screw shafts should have an axial-direction length L equal to the moving amount k per 1/2 rotation of the screw. The screw shaft must also have a proper contact angle ph1 in order to prevent raw material from penetrating the screw shaft.
The material used for the shaft depends on its application. A screw with a ball bearing will work better with a steel shaft than 1 made of aluminum. Aluminum screw shafts are the most commonly used for this application. Other materials include titanium. Some manufacturers also prefer stainless steel. However, if you want a screw with a more modern appearance, a titanium shaft is the way to go. In addition to that, screws with a chromium finish have better wear resistance.
The material of a screw shaft is important for a variety of applications. It needs to have high precision threads and ridges to perform its function. Manufacturers often use high-precision CNC machines and lathes to create screw shafts. Different screw shafts can have varying sizes and shapes, and each 1 will have different applications. Listed below are the different materials used for screw shafts. If you’re looking for a high-quality screw shaft, you should shop around.
A lead screw has an inverse relationship between contact surface pressure and sliding velocity. For heavier axial loads, a reduced rotation speed is needed. This curve will vary depending on the material used for the screw shaft and its lubrication conditions. Another important factor is end fixity. The material of a screw shaft can be either fixed or free, so make sure to consider this factor when choosing the material of your screw. The latter can also influence the critical speed and rigidity of the screw.
A screw shaft’s major diameter is the distance between the outer edge of the thread and the inner smooth part. Screw shafts are typically between 2 and 16 millimeters in diameter. They feature a cylindrical shape, a pointy tip, and a wider head and drive than the former. There are 2 basic types of screw heads: threaded and non-threaded. These have different properties and purposes.
Lead screws are a cost-effective alternative to ball screws, and are used for low power and light to medium-duty applications. They offer some advantages, but are not recommended for continuous power transmission. But lead screws are often quieter and smaller, which make them useful for many applications. Besides, they are often used in a kinematic pair with a nut object. They are also used to position objects.

Function of a screw shaft

When choosing a screw for a linear motion system, there are many factors that should be considered, such as the position of the actuator and the screw and nut selection. Other considerations include the overall length of travel, the fastest move profile, the duty cycle, and the repeatability of the system. As a result, screw technology plays a critical role in the overall performance of a system. Here are the key factors to consider when choosing a screw.
Screws are designed with an external threading that digs out material from a surface or object. Not all screw shafts have complete threading, however. These are known as partially threaded screws. Fully threaded screws feature complete external threading on the shaft and a pointed tip. In addition to their use as fasteners, they can be used to secure and tighten many different types of objects and appliances.
Another factor to consider is axial force. The higher the force, the bigger the screw needs to be. Moreover, screws are similar to columns that are subject to both tension and compression loads. During the compression load, bowing or deflection is not desirable, so the integrity of the screw is important. So, consider the design considerations of your screw shaft and choose accordingly. You can also increase the torque by using different shaft sizes.
Shaft collars are also an important consideration. These are used to secure and position components on the shaft. They also act as stroke limiters and to retain sprocket hubs, bearings, and shaft protectors. They are available in several different styles. In addition to single and double split shaft collars, they can be threaded or set screw. To ensure that a screw collar will fit tightly to the shaft, the cap must not be overtightened.
Screws can be cylindrical or conical and vary in length and diameter. They feature a thread that mates with a complementary helix in the material being screwed into. A self-tapping screw will create a complementary helix during driving, creating a complementary helix that allows the screw to work with the material. A screw head is also an essential part of a screw, providing gripping power and compression to the screw.
A screw’s pitch and lead are also important parameters to consider. The pitch of the screw is the distance between the crests of the threads, which increases mechanical advantage. If the pitch is too small, vibrations will occur. If the pitch is too small, the screw may cause excessive wear and tear on the machine and void its intended purpose. The screw will be useless if it can’t be adjusted. And if it can’t fit a shaft with the required diameter, then it isn’t a good choice.
Despite being the most common type, there are various types of screws that differ in their functions. For example, a machine screw has a round head, while a truss head has a lower-profile dome. An oval-its point screw is a good choice for situations where the screw needs to be adjusted frequently. Another type is a soft nylon tip, which looks like a Half-dog point. It is used to grip textured or curved surfaces.

China Hot selling Chinese Manufacturer of Steel Ring Forging for Feed Machines   with high qualityChina Hot selling Chinese Manufacturer of Steel Ring Forging for Feed Machines   with high quality