Tag Archives: shaft ball

China Professional Customized Continuous Helicoid Flight Cold Rolled Spiral Blade Screw Conveyor Blade ball screw shaft design

Product Description

Customized Continuous Helicoid Flight Cold Rolled Spiral Blade Screw Conveyor Blade

Product Description

Screw conveyor series screw conveyor is divided into horizontal screw conveyor and vertical screw
conveyor from the angle of displacement direction of conveying materials. It is mainly used for
horizontal conveying and vertical lifting of various loose materials, such as powder, granular and
small pieces. It is not suitable for conveying deteriorative, viscous, caking or high temperature,
pressure-resistant and relatively high. Special materials with high corrosiveness. Screw conveyor
is widely used in various industries, such as building materials, chemical industry, power, metallurgy,
coal mine, CZPT and other industries.

Product name: Helicoid Screw Flight

Other name: Screw blade, auger flight, auger blade, screw

Material: Carbon Steel, Stainless steel, and other material

Thickness: 2.5mm-6mm, 15mm-30mm

Main Use: Usually, it is used on the screw conveyor and drill equipment.

Main parameters as below: (we also can design as per customer’s request)

Most screw conveyors contain the following components:
•A conveyor screw, also known as a spiral blade or helicoid flighting
•A screw conveyor trough or tubular casing
•A drive unit (a shaft coupling and shaft seal or a chain drive)
•The drive mechanism

A Screw Conveyor or auger conveyor is a mechanism that uses a rotating helical screw blade,
called a flighting, usually within a tube, to move liquid or granular materials.
They are used in many bulk handling industries.
Screw conveyors in modern industry are often used horizontally or at a slight incline as an
efficient way to move semi-solid materials, including food waste, wood chips, aggregates,
cereal grains, animal feed,boiler ash, meat and bone meal, municipal solid waste,
and many others.

Technical data Model Specification		Helical Diameter mm	Pitch mm	Speed r/min	Standard Volume Conveyance			Speed r/min	Standard Volume Conveyance			Speed r/min	Standard Volume Conveyance			Speed r/min
				Speed r/min	lv(m³/h)			Speed r/min	lv(m³/h)			Speed r/min	lv(m³/h)			Speed r/min
				n	Diameter			n	Diameter			n	Diameter			n
				n	0.45	0.33	0.15	n	0.45	0.33	0.15	n	0.45	0.33	0.15	n
Medium-sized	LS200	200	200	100	16.9	12.4	5.6	80	13.5	9.9	4.5	63	10.7	7.8	3.6	50
	LS250	250	250	90	29.7	21.8	9.9	71	23.5	17.2	7.8	56	18.5	13.6	6.2	45
	LS315	315	315	80	52.9	38.8	17.6	63	41.6	30.5	13.9	50	33.1	24.2	11	40
	LS400	400	355	71	85.3	62.5	28.4	56	67.3	49.3	22.4	45	54.1	39.6	18	36
Large	LS500	500	400	63	133.2	97.7	44.4	50	105.8	77.6	35.3	40	84.6	62	28.2	32
Large	LS630	630	450	50	188.9	138.5	63	40	151.1	111	50.4	32	120.9	88.6	40.3	25
Oversize	LS800	800	500	40	270.7	198.5	90.2	32	216.6	159	72.2	25	169.2	124.1	54.4	20
	LS1000	1000	560	32	379	277.9	126	25	296.1	217	98.7	20	236.9	173.7	79	16
	LS1250	1250	630	25	520.5	381.5	174	20	416.4	305	139	16	333.1	244.3	111	13

Material: carbon steel, manganese steel, stainless steel, can meet the requirements of customers
from different way.
Continued cold rolling when it has 2-8mm thickness, outer Dia. ≤800MM
Continued twisting when it has 3-20 thickness.
Feature/ characteristic: Stamping and extending which adapted for any product but need making
specified mold.
Finishing: rolled cold finishing or polishing, or as your requirments.
Packing: Pallets for free fumigation if there is no special requirments.

Our Advantages

The conveyor screw (a spiral blade coiled around a shaft) is housed inside the tubular casing, where it is
driven at 1 end and held at the other. The trough may or may not feature a trough cover. Sometimes,
screw conveyors feature a spiral blade, but no shaft. In this case, they are called shaft less screw
conveyors, and the blade is driven at 1 end and free at the other.

1	We are ODM&OEM, design according to your drawing
2	Rich experience and good technology support( have engineers with more than 20 years experience)
3	Manufacturer and Trade Company
4	Low MOQ is accepted
5	100% inspection before delivery
6	Competitive price with high quality.
7	Convenient transportation

FAQ

Q: What is the payment method?
A: We accept TT (Bank Transfer), Western Union, L/C.
1. For total amount under US$500, 100% in advance.
2. For total amount above US$500, 30% in advance, the rest before shipment.

Q: What is your MOQ?
A: MOQ depends on our client’s needs, besides,we welcome trial order before mass-production.

Q: What is the production cycle?
A: It varies a lot depending on product dimension,technical requirements and quantity. We always
try to meet customers’ requirement by adjusting our workshop schedule.

Q: What kind of payment terms do you accept?
A: T/T, western union, etc.

Q: Is it possible to know how is my product going on without visiting your company?
A: We will offer a detailed products schedule and send weekly reports with digital pictures and
videos which show the machining progress.

Q: If you make poor quality goods,will you refund our fund?
A: We make products according to drawings or samples strictly until them reach your 100% satisfaction.
And actually we wont take a chance to do poor quality products.We are proud of keeping the spirit of good quality.

You can look through our website to find your interest or email your any questions through
below approach! We will reply to you within 12 hours.

After-sales Service:	as Specification
Warranty:	6 Months
Condition:	New

Samples:	US$ 5/Piece 1 Piece(Min.Order) \| Order Sample Metal Processing Machinery Parts

Customization:	Available \| Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

screwshaft

Screws and Screw Shafts

A screw is a mechanical device that holds objects together. Screws are usually forged or machined. They are also used in screw jacks and press-fitted vises. Their self-locking properties make them a popular choice in many different industries. Here are some of the benefits of screws and how they work. Also read about their self-locking properties. The following information will help you choose the right screw for your application.

Machined screw shaft

A machined screw shaft can be made of various materials, depending on the application. Screw shafts can be made from stainless steel, brass, bronze, titanium, or iron. Most manufacturers use high-precision CNC machines or lathes to manufacture these products. These products come in many sizes and shapes, and they have varying applications. Different materials are used for different sizes and shapes. Here are some examples of what you can use these screws for:
Screws are widely used in many applications. One of the most common uses is in holding objects together. This type of fastener is used in screw jacks, vises, and screw presses. The thread pitch of a screw can vary. Generally, a smaller pitch results in greater mechanical advantage. Hence, a machined screw shaft should be sized appropriately. This ensures that your product will last for a long time.
A machined screw shaft should be compatible with various threading systems. In general, the ASME system is used for threaded parts. The threaded hole occupies most of the shaft. The thread of the bolt occupy either part of the shaft, or the entire one. There are also alternatives to bolts, including riveting, rolling pins, and pinned shafts. These alternatives are not widely used today, but they are useful for certain niche applications.
If you are using a ball screw, you can choose to anneal the screw shaft. To anneal the screw shaft, use a water-soaked rag as a heat barrier. You can choose from two different options, depending on your application. One option is to cover the screw shaft with a dust-proof enclosure. Alternatively, you can install a protective heat barrier over the screw shaft. You can also choose to cover the screw shaft with a dust-proof machine.
If you need a smaller size, you can choose a smaller screw. It may be smaller than a quarter of an inch, but it may still be compatible with another part. The smaller ones, however, will often have a corresponding mating part. These parts are typically denominated by their ANSI numerical size designation, which does not indicate threads-per-inch. There is an industry standard for screw sizes that is a little easier to understand.

Ball screw nut

When choosing a Ball screw nut for a screw shaft, it is important to consider the critical speed of the machine. This value excites the natural frequency of a screw and determines how fast it can be turned. In other words, it varies with the screw diameter and unsupported length. It also depends on the screw shaft’s diameter and end fixity. Depending on the application, the nut can be run at a maximum speed of about 80% of its theoretical critical speed.
The inner return of a ball nut is a cross-over deflector that forces the balls to climb over the crest of the screw. In one revolution of the screw, a ball will cross over the nut crest to return to the screw. Similarly, the outer circuit is a circular shape. Both flanges have one contact point on the ball shaft, and the nut is connected to the screw shaft by a screw.
The accuracy of ball screws depends on several factors, including the manufacturing precision of the ball grooves, the compactness of the assembly, and the set-up precision of the nut. Depending on the application, the lead accuracy of a ball screw nut may vary significantly. To improve lead accuracy, preloading, and lubrication are important. Ewellix ball screw assembly specialists can help you determine the best option for your application.
A ball screw nut should be preloaded prior to installation in order to achieve the expected service life. The smallest amount of preload required can reduce a ball screw’s calculated life by as much as 90 percent. Using a lubricant of a standard grade is recommended. Some lubricants contain additives. Using grease or oil in place of oil can prolong the life of the screw.
A ball screw nut is a type of threaded nut that is used in a number of different applications. It works similar to a ball bearing in that it contains hardened steel balls that move along a series of inclined races. When choosing a ball screw nut, engineers should consider the following factors: speed, life span, mounting, and lubrication. In addition, there are other considerations, such as the environment in which the screw is used.
screwshaft

Self-locking property of screw shaft

A self-locking screw is one that is capable of rotating without the use of a lock washer or bolt. This property is dependent on a number of factors, but one of them is the pitch angle of the thread. A screw with a small pitch angle is less likely to self-lock, while a large pitch angle is more likely to spontaneously rotate. The limiting angle of a self-locking thread can be calculated by calculating the torque Mkdw at which the screw is first released.
The pitch angle of the screw’s threads and its coefficient of friction determine the self-locking function of the screw. Other factors that affect its self-locking function include environmental conditions, high or low temperature, and vibration. Self-locking screws are often used in single-line applications and are limited by the size of their pitch. Therefore, the self-locking property of the screw shaft depends on the specific application.
The self-locking feature of a screw is an important factor. If a screw is not in a state of motion, it can be a dangerous or unusable machine. The self-locking property of a screw is critical in many applications, from corkscrews to threaded pipe joints. Screws are also used as power linkages, although their use is rarely necessary for high-power operations. In the archimedes’ screw, for example, the blades of the screw rotate around an axis. A screw conveyor uses a rotating helical chamber to move materials. A micrometer uses a precision-calibrated screw to measure length.
Self-locking screws are commonly used in lead screw technology. Their pitch and coefficient of friction are important factors in determining the self-locking property of screws. This property is advantageous in many applications because it eliminates the need for a costly brake. Its self-locking property means that the screw will be secure without requiring a special kind of force or torque. There are many other factors that contribute to the self-locking property of a screw, but this is the most common factor.
Screws with right-hand threads have threads that angle up to the right. The opposite is true for left-hand screws. While turning a screw counter-clockwise will loosen it, a right-handed person will use a right-handed thumb-up to turn it. Similarly, a left-handed person will use their thumb to turn a screw counter-clockwise. And vice versa.
screwshaft

Materials used to manufacture screw shaft

Many materials are commonly used to manufacture screw shafts. The most common are steel, stainless steel, brass, bronze, and titanium. These materials have advantages and disadvantages that make them good candidates for screw production. Some screw types are also made of copper to fight corrosion and ensure durability over time. Other materials include nylon, Teflon, and aluminum. Brass screws are lightweight and have aesthetic appeal. The choice of material for a screw shaft depends on the use it will be made for.
Shafts are typically produced using three steps. Screws are manufactured from large coils, wire, or round bar stock. After these are produced, the blanks are cut to the appropriate length and cold headed. This cold working process pressudes features into the screw head. More complicated screw shapes may require two heading processes to achieve the desired shape. The process is very precise and accurate, so it is an ideal choice for screw manufacturing.
The type of material used to manufacture a screw shaft is crucial for the function it will serve. The type of material chosen will depend on where the screw is being used. If the screw is for an indoor project, you can opt for a cheaper, low-tech screw. But if the screw is for an outdoor project, you’ll need to use a specific type of screw. This is because outdoor screws will be exposed to humidity and temperature changes. Some screws may even be coated with a protective coating to protect them from the elements.
Screws can also be self-threading and self-tapping. The self-threading or self-tapping screw creates a complementary helix within the material. Other screws are made with a thread which cuts into the material it fastens. Other types of screws create a helical groove on softer material to provide compression. The most common uses of a screw include holding two components together.
There are many types of bolts available. Some are more expensive than others, but they are generally more resistant to corrosion. They can also be made from stainless steel or aluminum. But they require high-strength materials. If you’re wondering what screws are, consider this article. There are tons of options available for screw shaft manufacturing. You’ll be surprised how versatile they can be! The choice is yours, and you can be confident that you’ll find the screw shaft that will best fit your application.

China Professional Customized Continuous Helicoid Flight Cold Rolled Spiral Blade Screw Conveyor Blade ball screw shaft design
editor by CX 2023-11-21

China DL Best Seller Machinery Rigid Round Shaft Coupling Coupler ball screw shaft coupling

Warranty: 1 year
Applicable Industries: Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Farms, Printing Shops, Construction works , Energy & Mining, Other
Customized support: OEM, ODM, OBM
Structure: Clamping
Flexible or Rigid: Flexible
Standard or Nonstandard: Nonstandard
Material: Aluminium Alloy
Brand: Transfer
Type: Disc
Color: Silver
Inner Hole Diameter: 3~55
Outer Diameter: 19~126
Body Material: High strength Aluminum
Rotate Speed (r/min): 0~10000
Tightening Method: clamping screw
Allowable Torque Range (N.m): 7~3400N.M
Usage: Servo motor/ Steppingmotor/Module
Packaging Details: carton box + wooden box
Port: HangZhou

Cnc Flexible Shaft Coupling Double Diaphragm Clamp Series Shaft Couplings Aluminum Coupling for Encoder and Miniature Motor

Checkout EquipmentsOur inspection equipment can accurately detect the size, shape and shape tolerance of the couplings, so as to complete parts detection, shape measurement, ATV frame Little God of War Protection Rack Shelf Handrail Bottom Protection Bracket Upper Lower Rocker Arm Rear Axle Frame process control and other tasks. Coordinate Measuring Machine Roughness Tester Micro Vickers Contourograph Height Guage Metallography Microscope HangZhou Transfer Precision Transmission Machinery Co., Ltd.Our company is a professional production, research & development, sales of transmission parts as 1 of the technology enterprises, deep cultivation industry for 11 years.At present,the company has passed the ISO9001 certification, CNC production equipment reaches more than 80%,conventional product inventory 1 million pieces, the company has advanced ERP & CRM operation management system, strong pre-sale and after-sale support team, to provide professional technical guidance, CZPT 9 Inch Bolt-In Rear end housing Semi-floating with oil plug and drain plug rear axles to provide you with the selection, design, installation to maintenance and post-service support. Our certificateThe first 1 is our bank account,the second 1 is our business licence,and the last 2 ones are our registration marks. 1: Are you a trading company or a manufacturer ? We are a professional manufacturer of couplings and universal joints. 2：Why choose Transfer Precision Transmission ? As a professional manufacturer of coupling and universal joints, we possess a skillful team of workers and designers To provide our customers with first-class services. 3: Can You Strictly Follow The Tolerance on The Drawing And Meet The High Precision? Yes, we can, we can provide high precision parts and make the parts as your drawing. 4：How long does it take to delivery? Generally, it is 1-2 days if the goods are in stock. or it is 5-10 days if the goods are not in stock, it depends on quantity. 5：How to deal with the parts received when they are found to be in poor quality? A: In case of non- conformance, please contact us immediately, we will check the problems and have them reworked or repaired at the first time. If none of these works, we support a refund.

screwshaft

Screw Shaft Types and Uses

Various uses for the screw shaft are numerous. Its major diameter is the most significant characteristic, while other aspects include material and function are important. Let us explore these topics in more detail. There are many different types of screw shafts, which include bronze, brass, titanium, and stainless steel. Read on to learn about the most common types. Listed below are some of the most common uses for a screw shaft. These include: C-clamps, screw jacks, vises, and more.

Major diameter of a screw shaft

A screw’s major diameter is measured in fractions of an inch. This measurement is commonly found on the screw label. A screw with a major diameter less than 1/4″ is labeled #0 to #14; those with a larger diameter are labeled fractions of an inch in a corresponding decimal scale. The length of a screw, also known as the shaft, is another measure used for the screw.
The major diameter of a screw shaft is the greater of its two outer diameters. When determining the major diameter of a screw, use a caliper, micrometer, or steel rule to make an accurate measurement. Generally, the first number in the thread designation refers to the major diameter. Therefore, if a screw has a thread of 1/2-10 Acme, the major diameter of the thread is.500 inches. The major diameter of the screw shaft will be smaller or larger than the original diameter, so it’s a good idea to measure the section of the screw that’s least used.
Another important measurement is the pitch. This measures the distance between one thread’s tip and the next thread’s corresponding point. Pitch is an important measurement because it refers to the distance a screw will advance in one turn. While lead and pitch are two separate concepts, they are often used interchangeably. As such, it’s important to know how to use them properly. This will make it easier to understand how to select the correct screw.
There are three different types of threads. The UTS and ISO metric threads are similar, but their common values for Dmaj and Pmaj are different. A screw’s major diameter is the largest diameter, while the minor diameter is the lowest. A nut’s major diameter, or the minor diameter, is also called the nut’s inside diameter. A bolt’s major diameter and minor diameter are measured with go/no-go gauges or by using an optical comparator.
The British Association and American Society of Mechanical Engineers standardized screw threads in the 1840s. A standard named “British Standard Whitworth” became a common standard for screw threads in the United States through the 1860s. In 1864, William Sellers proposed a new standard that simplified the Whitworth thread and had a 55 degree angle at the tip. Both standards were widely accepted. The major diameter of a screw shaft can vary from one manufacturer to another, so it’s important to know what size screw you’re looking for.
In addition to the thread angle, a screw’s major diameter determines the features it has and how it should be used. A screw’s point, or “thread”, is usually spiky and used to drill into an object. A flat tipped screw, on the other hand, is flat and requires a pre-drilled hole for installation. Finally, the diameter of a screw bolt is determined by the major and minor diameters.
screwshaft

Material of a screw shaft

A screw shaft is a piece of machine equipment used to move raw materials. The screw shaft typically comprises a raw material w. For a particular screw to function correctly, the raw material must be sized properly. In general, screw shafts should have an axial-direction length L equal to the moving amount k per 1/2 rotation of the screw. The screw shaft must also have a proper contact angle ph1 in order to prevent raw material from penetrating the screw shaft.
The material used for the shaft depends on its application. A screw with a ball bearing will work better with a steel shaft than one made of aluminum. Aluminum screw shafts are the most commonly used for this application. Other materials include titanium. Some manufacturers also prefer stainless steel. However, if you want a screw with a more modern appearance, a titanium shaft is the way to go. In addition to that, screws with a chromium finish have better wear resistance.
The material of a screw shaft is important for a variety of applications. It needs to have high precision threads and ridges to perform its function. Manufacturers often use high-precision CNC machines and lathes to create screw shafts. Different screw shafts can have varying sizes and shapes, and each one will have different applications. Listed below are the different materials used for screw shafts. If you’re looking for a high-quality screw shaft, you should shop around.
A lead screw has an inverse relationship between contact surface pressure and sliding velocity. For heavier axial loads, a reduced rotation speed is needed. This curve will vary depending on the material used for the screw shaft and its lubrication conditions. Another important factor is end fixity. The material of a screw shaft can be either fixed or free, so make sure to consider this factor when choosing the material of your screw. The latter can also influence the critical speed and rigidity of the screw.
A screw shaft’s major diameter is the distance between the outer edge of the thread and the inner smooth part. Screw shafts are typically between two and sixteen millimeters in diameter. They feature a cylindrical shape, a pointy tip, and a wider head and drive than the former. There are two basic types of screw heads: threaded and non-threaded. These have different properties and purposes.
Lead screws are a cost-effective alternative to ball screws, and are used for low power and light to medium-duty applications. They offer some advantages, but are not recommended for continuous power transmission. But lead screws are often quieter and smaller, which make them useful for many applications. Besides, they are often used in a kinematic pair with a nut object. They are also used to position objects.
screwshaft

Function of a screw shaft

When choosing a screw for a linear motion system, there are many factors that should be considered, such as the position of the actuator and the screw and nut selection. Other considerations include the overall length of travel, the fastest move profile, the duty cycle, and the repeatability of the system. As a result, screw technology plays a critical role in the overall performance of a system. Here are the key factors to consider when choosing a screw.
Screws are designed with an external threading that digs out material from a surface or object. Not all screw shafts have complete threading, however. These are known as partially threaded screws. Fully threaded screws feature complete external threading on the shaft and a pointed tip. In addition to their use as fasteners, they can be used to secure and tighten many different types of objects and appliances.
Another factor to consider is axial force. The higher the force, the bigger the screw needs to be. Moreover, screws are similar to columns that are subject to both tension and compression loads. During the compression load, bowing or deflection is not desirable, so the integrity of the screw is important. So, consider the design considerations of your screw shaft and choose accordingly. You can also increase the torque by using different shaft sizes.
Shaft collars are also an important consideration. These are used to secure and position components on the shaft. They also act as stroke limiters and to retain sprocket hubs, bearings, and shaft protectors. They are available in several different styles. In addition to single and double split shaft collars, they can be threaded or set screw. To ensure that a screw collar will fit tightly to the shaft, the cap must not be overtightened.
Screws can be cylindrical or conical and vary in length and diameter. They feature a thread that mates with a complementary helix in the material being screwed into. A self-tapping screw will create a complementary helix during driving, creating a complementary helix that allows the screw to work with the material. A screw head is also an essential part of a screw, providing gripping power and compression to the screw.
A screw’s pitch and lead are also important parameters to consider. The pitch of the screw is the distance between the crests of the threads, which increases mechanical advantage. If the pitch is too small, vibrations will occur. If the pitch is too small, the screw may cause excessive wear and tear on the machine and void its intended purpose. The screw will be useless if it can’t be adjusted. And if it can’t fit a shaft with the required diameter, then it isn’t a good choice.
Despite being the most common type, there are various types of screws that differ in their functions. For example, a machine screw has a round head, while a truss head has a lower-profile dome. An oval-its point screw is a good choice for situations where the screw needs to be adjusted frequently. Another type is a soft nylon tip, which looks like a Half-dog point. It is used to grip textured or curved surfaces.

China DL Best Seller Machinery Rigid Round Shaft Coupling Coupler ball screw shaft coupling
editor by czh 2023-06-27

China Customizing Service Stainless Steel Precision Casting Products ball screw shaft manufacturer

Model Number: custom
Product Name: grinder worm feeder screw
Application scope: meat grinder spare parts
machining equipment: CNC center, CNC milling machine, CNC turning machine,
Material: Copper, Brass, Plastic, Stainless steel, Aluminum, etc
Surface treatment: painting customization
Drawing format: PDF,dwg,2D,3D etc
Process: Cnc Machining, cnc lathe, achining, cnc turning and milling
Lead time: 25-40
Tolerance: +/-0.005mm
Service: OEM & ODM
Packaging Details: Standard export packaging or according to customer requirements
Port: China main port

Densen Customized worm feed screw Assy

Description	worm feed screw Assy
Type	Customized
Application	meat grinder
Processing	Precision investment casting and CNC machining
Material	304/316 stainless steel or customized
Weight Ranges	0.05-100kg
Tolernace	Controlled by ISO 8006 CT4-6
Design Support	Pro-E, UG,SolidWorks,AutoCad, PDF
Quality Control	Material, Dimension,Performance,inside defects, Hot sale AXK140180+2AS needle bearing Factory direct supply Balance test
Standard	ASTM,DIN,JIS,ISO,GB standards

Products show:

Declaration:
Products shown herein are made to the requirements of specific customers and are illustrative of the types of manufacturing capabilities available within CZPT group of companies.
Our policy is that none of these products will be sold to 3rd parties without written consent of the customers to whom the tooling, design and specifications belong.
Q & A time
Company InformationHangZhou New CZPT Casting and Forging Company is the sales company of HangZhou CZPT Group of Companies. Features of New CZPT simply summarized as below:
1. Trusted supplier of steel, iron & non-ferrous components;
2. Extensive documented quality program in place.
3. Castings, forgings, stampings, machining, welding & fabrication services.
4. 9 related factories, over 50 joint-venture sub-contractors.
5. 25+ years of manufacturing experiences, 10+ years of exporting experience
6. 100% of products sold to overseas customers.
7. 50% of customer base is forturne 500 companies.

Densen Group Architecture:

Processing supportCasting Service:
Casting is a manufacturing process in which a liquid material is usually poured into a mold, which contains a hollow cavity of the desired shape, and then allowed to solidify.
New CZPT offers multiple investment casting, sand casting, permanent casting, die casting, 7x19x5 mm S607 W5 2RS Hybrid Ceramic Bearings 607 RS S607C S607RS 7195 mm RC Model & Fishing Reel Miniature Ceramic Bearings low pressure casting, ESR casting, lost foam casting, etc. Material can be handled include steel, iron, non-ferrous. Single component weight range is from 0.01Kg to 150 tons separately.

Forging Service:
Forging is a manufacturing process involving the shaping of metal using localized compressive forces. New CZPT offers open die forging, closed die forging and ring forging services. Material can be steel, iron and non-ferrous. Material can be handled include steel, iron, non-ferrous. Single component weight range is from 0.1Kg to 50,000Kgs.

Stamping Service:
Stamping (also known as punching) is the process of placing flat sheet metal in either blank or coil form into a stamping press where a tool and die surface forms the metal into a net shape.
New Densen-XBL has more than 60 sets stamping equipments, is the designed supplier for several famous bands automotive companies, has the full ability to offer whole processes from blanking, stamping, welding, to electrostatic spraying for CZPT customers.

Welding & Fabrication Service:
Welding Frabrication is the fabrication process of metal structures by cutting, bending, then assembling the components together through welding
New CZPT offers manual arc welding ,laser welding and robot welding etc. UT, MPT,RT, A2-A4 SS321 Stainless Steel Slotted Headless Shoulder Screw DIN927 PT all are available used for inspection, WPS &PQR (Welding Process Specification& Procedure Qualification Records) before production is available under clients’ requirement.

Machining Service:
Machining is any of various processes in which a piece of raw material is cut into a desired final shape and size by a controlled material-removal process.
New Densen-XBL has more than 60 sets precision machines incl. CNC center, boring, milling, lathing, etc., and more than 300 inspection instruments incl. 3 sets CMM with grade μm. Repeated tolerance can be maintained as 0.02mm. Meanwhile awarded by certificates ISO9001-2008; ISO/TS16949. New Densen-XBL specialized in high precise machining for small-middle-big metal components.

3rd Party Inspection
3rd Party Inspection:
New CZPT worked as 3rd party inspection center besides its sister factories or sub-contractors’ self inspection, Offers process inspection, random inspection and before delivedry inspection services for material, mechanical, inside defects, dimentional, pressure, load, balance, surface treatment, Max power 90KW PMSM driving system , supply motor , controller, lithium battery. visual inspection and test. Weekly project follow-up report together with pictures and videos, full quality inspection documentation available.
New CZPT also designed as 3rd party inspection representative for several customers when their products made by other suppliers.

Application:

screwshaft

Screw Shaft Types and Uses

Major diameter of a screw shaft

Material of a screw shaft

Function of a screw shaft

China Customizing Service Stainless Steel Precision Casting Products ball screw shaft manufacturer
editor by czh 2023-06-27

China Chinese product CNHY brand ball Screw rod and nut DFU series For CNC shaft collar with thumb screw

Manufacturing Process: Rolled Thread
Material: Bearing Steel (Gcr15)
Length: Can be Custmized
Product name: High Precision Ball Screw
Size of screw shaft: 1604-1571
Type: CNC Machine Ball Lead Screw
Certificate: ISO9001:2008
Precision rate: Internatinal Precision
Stock: In stock
Nut: Double Nuts or single nut
Packaging Details: Sampler order: Neutral packaging inside, and carton outside, delivered by express, such as DHL,TNT. Bulk order: Neutral packaging inside, J288 16x25x30 mm Carbon Brush for Motor XQ-5-4A1 XQ-5.2T XQ-5-6 XQ-5-4A XQ-6.3A XQ-7A XQD-10-1B and Plywood box outside, delivered by sea.
Port: Ning bo / Shangha

Precision:P7 GradeThis item include: If you need to machine according to your drawings end machining, please tell us before order. Custom lengths:Any length you want, and please let us know, we will check the total costs as soon as possible.
Products Show

Company Information
FAQ
1)CNHY Quality Control
1. We have the professional production team, Speedometer Stepper Motor X27 589 Stepper Motor Instrument Cluster,automotive instrumentation stepper motor production line and experience experts who engqged in this industry line for more than 10 more years.
2) Competitive Price
CNHY is a manufactory which can export directly to customer, so there is no intermediary cost involved. We provide our foreign customer lower price than the domestic market. Since we can get tax refund from the government.
3)Quickly Delivery
We have large amount of stock, we can delivery customer’s order just-in-time for small order, 10-20days for big order.
4) Best After-Sale Service
CNHY supply the after-sale service and technical assistance as per customer’s requirement and needs. Customers are always given quick support
5)May I visit your factory?
Sure, welcome any time. We can also pick you up at airport and station.

screwshaft

What Are Screw Shaft Threads?

A screw shaft is a threaded part used to fasten other components. The threads on a screw shaft are often described by their Coefficient of Friction, which describes how much friction is present between the mating surfaces. This article discusses these characteristics as well as the Material and Helix angle. You’ll have a better understanding of your screw shaft’s threads after reading this article. Here are some examples. Once you understand these details, you’ll be able to select the best screw nut for your needs.

Coefficient of friction between the mating surfaces of a nut and a screw shaft

There are two types of friction coefficients. Dynamic friction and static friction. The latter refers to the amount of friction a nut has to resist an opposing motion. In addition to the material strength, a higher coefficient of friction can cause stick-slip. This can lead to intermittent running behavior and loud squeaking. Stick-slip may lead to a malfunctioning plain bearing. Rough shafts can be used to improve this condition.
The two types of friction coefficients are related to the applied force. When applying force, the applied force must equal the nut’s pitch diameter. When the screw shaft is tightened, the force may be removed. In the case of a loosening clamp, the applied force is smaller than the bolt’s pitch diameter. Therefore, the higher the property class of the bolt, the lower the coefficient of friction.
In most cases, the screwface coefficient of friction is lower than the nut face. This is because of zinc plating on the joint surface. Moreover, power screws are commonly used in the aerospace industry. Whether or not they are power screws, they are typically made of carbon steel, alloy steel, or stainless steel. They are often used in conjunction with bronze or plastic nuts, which are preferred in higher-duty applications. These screws often require no holding brakes and are extremely easy to use in many applications.
The coefficient of friction between the mating surfaces of t-screws is highly dependent on the material of the screw and the nut. For example, screws with internal lubricated plastic nuts use bearing-grade bronze nuts. These nuts are usually used on carbon steel screws, but can be used with stainless steel screws. In addition to this, they are easy to clean.

Helix angle

In most applications, the helix angle of a screw shaft is an important factor for torque calculation. There are two types of helix angle: right and left hand. The right hand screw is usually smaller than the left hand one. The left hand screw is larger than the right hand screw. However, there are some exceptions to the rule. A left hand screw may have a greater helix angle than a right hand screw.
A screw’s helix angle is the angle formed by the helix and the axial line. Although the helix angle is not usually changed, it can have a significant effect on the processing of the screw and the amount of material conveyed. These changes are more common in two stage and special mixing screws, and metering screws. These measurements are crucial for determining the helix angle. In most cases, the lead angle is the correct angle when the screw shaft has the right helix angle.
High helix screws have large leads, sometimes up to six times the screw diameter. These screws reduce the screw diameter, mass, and inertia, allowing for higher speed and precision. High helix screws are also low-rotation, so they minimize vibrations and audible noises. But the right helix angle is important in any application. You must carefully choose the right type of screw for the job at hand.
If you choose a screw gear that has a helix angle other than parallel, you should select a thrust bearing with a correspondingly large center distance. In the case of a screw gear, a 45-degree helix angle is most common. A helix angle greater than zero degrees is also acceptable. Mixing up helix angles is beneficial because it allows for a variety of center distances and unique applications.
screwshaft

Thread angle

The thread angle of a screw shaft is measured from the base of the head of the screw to the top of the screw’s thread. In America, the standard screw thread angle is 60 degrees. The standard thread angle was not widely adopted until the early twentieth century. A committee was established by the Franklin Institute in 1864 to study screw threads. The committee recommended the Sellers thread, which was modified into the United States Standard Thread. The standardized thread was adopted by the United States Navy in 1868 and was recommended for construction by the Master Car Builders’ Association in 1871.
Generally speaking, the major diameter of a screw’s threads is the outside diameter. The major diameter of a nut is not directly measured, but can be determined with go/no-go gauges. It is necessary to understand the major and minor diameters in relation to each other in order to determine a screw’s thread angle. Once this is known, the next step is to determine how much of a pitch is necessary to ensure a screw’s proper function.
Helix angle and thread angle are two different types of angles that affect screw efficiency. For a lead screw, the helix angle is the angle between the helix of the thread and the line perpendicular to the axis of rotation. A lead screw has a greater helix angle than a helical one, but has higher frictional losses. A high-quality lead screw requires a higher torque to rotate. Thread angle and lead angle are complementary angles, but each screw has its own specific advantages.
Screw pitch and TPI have little to do with tolerances, craftsmanship, quality, or cost, but rather the size of a screw’s thread relative to its diameter. Compared to a standard screw, the fine and coarse threads are easier to tighten. The coarser thread is deeper, which results in lower torques. If a screw fails because of torsional shear, it is likely to be a result of a small minor diameter.

Material

Screws have a variety of different sizes, shapes, and materials. They are typically machined on CNC machines and lathes. Each type is used for different purposes. The size and material of a screw shaft are influenced by how it will be used. The following sections give an overview of the main types of screw shafts. Each one is designed to perform a specific function. If you have questions about a specific type, contact your local machine shop.
Lead screws are cheaper than ball screws and are used in light-duty, intermittent applications. Lead screws, however, have poor efficiency and are not recommended for continuous power transmission. But, they are effective in vertical applications and are more compact. Lead screws are typically used as a kinematic pair with a ball screw. Some types of lead screws also have self-locking properties. Because they have a low coefficient of friction, they have a compact design and very few parts.
Screws are made of a variety of metals and alloys. Steel is an economical and durable material, but there are also alloy steel and stainless steel types. Bronze nuts are the most common and are often used in higher-duty applications. Plastic nuts provide low-friction, which helps reduce the drive torques. Stainless steel screws are also used in high-performance applications, and may be made of titanium. The materials used to create screw shafts vary, but they all have their specific functions.
Screws are used in a wide range of applications, from industrial and consumer products to transportation equipment. They are used in many different industries, and the materials they’re made of can determine their life. The life of a screw depends on the load that it bears, the design of its internal structure, lubrication, and machining processes. When choosing screw assemblies, look for a screw made from the highest quality steels possible. Usually, the materials are very clean, so they’re a great choice for a screw. However, the presence of imperfections may cause a normal fatigue failure.
screwshaft

Self-locking features

Screws are known to be self-locking by nature. The mechanism for this feature is based on several factors, such as the pitch angle of the threads, material pairing, lubrication, and heating. This feature is only possible if the shaft is subjected to conditions that are not likely to cause the threads to loosen on their own. The self-locking ability of a screw depends on several factors, including the pitch angle of the thread flank and the coefficient of sliding friction between the two materials.
One of the most common uses of screws is in a screw top container lid, corkscrew, threaded pipe joint, vise, C-clamp, and screw jack. Other applications of screw shafts include transferring power, but these are often intermittent and low-power operations. Screws are also used to move material in Archimedes’ screw, auger earth drill, screw conveyor, and micrometer.
A common self-locking feature for a screw is the presence of a lead screw. A screw with a low PV value is safe to operate, but a screw with high PV will need a lower rotation speed. Another example is a self-locking screw that does not require lubrication. The PV value is also dependent on the material of the screw’s construction, as well as its lubrication conditions. Finally, a screw’s end fixity – the way the screw is supported – affects the performance and efficiency of a screw.
Lead screws are less expensive and easier to manufacture. They are a good choice for light-weight and intermittent applications. These screws also have self-locking capabilities. They can be self-tightened and require less torque for driving than other types. The advantage of lead screws is their small size and minimal number of parts. They are highly efficient in vertical and intermittent applications. They are not as accurate as lead screws and often have backlash, which is caused by insufficient threads.

China Chinese product CNHY brand ball Screw rod and nut DFU series For CNC shaft collar with thumb screw
editor by czh 2023-06-27

China manufacturer CZPT 20mm Lead Rolled Ball Screw for Industrial Lathe (TXR Series, Lead: 20mm, Shaft: 10mm) sector shaft adjustment screw

Product Description

TXR Series Sleeve Type Single Nut Ball Screw (C5/Ct7/Ct10)

Table of Shaft dia. and Lead combination for Rolled Ball Screw

		Lead (mm)
		0.5	1	1.5	2	2.5	3	4	5	6	8	10	12	15	20	30
Shaft dia (mm)	4		/		/
	5							/
	6		/		/					/		/
	8		/		/	/			/		/	/	/
	10				/		/	/	/	/		/	/	/	/
	12				/							/
	13												/	/	/
	14				/			/
	15								/			/			/
	16

Accuracy Class & Axial Clearance

Accuracy grade of TXR series(sleeve type single nut ball screw)are based on C5,Ct7 and Ct10(JIS B 1192-3). According to accuracy grade, Axial play 0.005(Preload :C5),0.02(Ct7) and 0.05mm or less(Ct10).

Material & Surface Hardness

TXR series (sleeve type single nut ball screw) of screw shaft screw material S55C (induction hardening), nut material SCM415H (carburizing and hardening), the surface hardness of the ball screw part is HRC58 or higher.

Shaft End Shape

The shape of the shaft end of the TXR series (sleeve type single nut ball screws) has been standardized.

Application:

1. Medical industry
2.Lithium battery industry
3.Solar photovoltaic industry
4. Semi conductor Industry
5. General industry machinery
6. Machine tool
7. Parking system
8. High-speed rail and aviation transportation equipment
9. 3C industry etc

Technical Drawing

Specification List

FACTORY DETAILED PROCESSING PHOTOS

HIGH QUALITY CONTROL SYSTEM

FAQ

1. Why choose CZPT China?

Over the past 14 years, CZPT has always insisted that “products and services” start from Japanese industry standards,taking ZheJiang standards as the bottom line, actively invest in the development of new transmission components and self-experiment and test. With the service tenet of “exceeding customer expectations”, establish a “trusted” partnership.

2. What is your main products ?

We are a leading manufacturer and distributor of linear motion components in China. Especially miniature size of Ball Screws and Linear Actuators and linear motion guideways. Our brand “KGG” stands for ” Know-how,” ” Great Quality,” and ” Good value” and our factory is located in the most advanced city in China: ZheJiang with the best equipment and sophisticated technology, completely strict quality control system. Our aim is to supply world leader class linear motion components but with most reasonable price in the world.

3. How to Custom-made (OEM/ODM)?

If you have a product drawing or a sample, please send to us, and we can custom-made the as your required. We will also provide our professional advices of the products to make the design to be more realized & maximize the performance.

4. When can I get the quotation?

We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price,please call us or tell us in your email so that we will regard your inquiry priority.

5. How can I get a sample to check the quality?

After confirmation of our quoted price, you can place the sample order. The sample will be started after you sign back our detailed technical file.

6. What’s your payment terms?

Our payment terms is 30% deposit,balance 70% before shipment.

Precision:	C5
Screw Diameter:	10mm
Flange:	With Flange
Nut Number:	Single
Rows Number:	3-Row
Nut Type:	Sleeve Type Single Nut

Customization:	Available \| Customized Request

screwshaft

Types of Screw Shafts

Screw shafts come in various types and sizes. These types include fully threaded, Lead, and Acme screws. Let’s explore these types in more detail. What type of screw shaft do you need? Which one is the best choice for your project? Here are some tips to choose the right screw:

Machined screw shaft

The screw shaft is a basic piece of machinery, but it can be further customized depending on the needs of the customer. Its features include high-precision threads and ridges. Machined screw shafts are generally manufactured using high-precision CNC machines or lathes. The types of screw shafts available vary in shape, size, and material. Different materials are suitable for different applications. This article will provide you with some examples of different types of screw shafts.
Ball screws are used for a variety of applications, including mounting machines, liquid crystal devices, measuring devices, and food and medical equipment. Various shapes are available, including miniature ball screws and nut brackets. They are also available without keyway. These components form a high-accuracy feed mechanism. Machined screw shafts are also available with various types of threaded ends for ease of assembly. The screw shaft is an integral part of linear motion systems.
When you need a machined screw shaft, you need to know the size of the threads. For smaller machine screws, you will need a mating part. For smaller screw sizes, the numbers will be denominated as industry Numeric Sizes. These denominations are not metric, but rather in mm, and they may not have a threads-per-inch designation. Similarly, larger machine screws will usually have threads that have a higher pitch than those with a lower pitch.
Another important feature of machine screws is that they have a thread on the entire shaft, unlike their normal counterparts. These machine screws have finer threads and are intended to be screwed into existing tapped holes using a nut. This means that these screws are generally stronger than other fasteners. They are usually used to hold together electronic components, industrial equipment, and engines. In addition to this, machine screws are usually made of a variety of materials.

Acme screw

An Acme screw is the most common type of threaded shaft available. It is available in a variety of materials including stainless steel and carbon steel. In many applications, it is used for large plates in crushing processes. ACME screws are self-locking and are ideal for applications requiring high clamping force and low friction. They also feature a variety of standard thread forms, including knurling and rolled worms.
Acme screws are available in a wide range of sizes, from 1/8″ to 6″. The diameter is measured from the outside of the screw to the bottom of the thread. The pitch is equal to the lead in a single start screw. The lead is equal to the pitch plus the number of starts. A screw of either type has a standard pitch and a lead. Acme screws are manufactured to be accurate and durable. They are also widely available in a wide range of materials and can be customized to fit your needs.
Another type of Acme screw is the ball screw. These have no back drive and are widely used in many applications. Aside from being lightweight, they are also able to move at faster speeds. A ball screw is similar to an Acme screw, but has a different shape. A ball screw is usually longer than an Acme screw. The ball screw is used for applications that require high linear speeds. An Acme screw is a common choice for many industries.
There are many factors that affect the speed and resolution of linear motion systems. For example, the nut position and the distance the screw travels can all affect the resolution. The total length of travel, the speed, and the duty cycle are all important. The lead size will affect the maximum linear speed and force output. If the screw is long, the greater the lead size, the higher the resolution. If the lead length is short, this may not be the most efficient option.
screwshaft

Lead screw

A lead screw is a threaded mechanical device. A lead screw consists of a cylindrical shaft, which includes a shallow thread portion and a tightly wound spring wire. This spring wire forms smooth, hard-spaced thread convolutions and provides wear-resistant engagement with the nut member. The wire’s leading and trailing ends are anchored to the shaft by means appropriate to the shaft’s composition. The screw is preferably made of stainless steel.
When selecting a lead screw, one should first determine its critical speed. The critical speed is the maximum rotations per minute based on the natural frequency of the screw. Excessive backlash will damage the lead screw. The maximum number of revolutions per minute depends on the screw’s minor diameter, length, assembly alignment, and end fixity. Ideally, the critical speed is 80% of its evaluated critical speed. A critical speed is not exceeded because excessive backlash would damage the lead screw and may be detrimental to the screw’s performance.
The PV curve defines the safe operating limits of a lead screw. This relationship describes the inverse relationship between contact surface pressure and sliding velocity. As the PV value increases, a lower rotation speed is required for heavier axial loads. Moreover, PV is affected by material and lubrication conditions. Besides, end fixity, which refers to the way the lead screw is supported, also affects its critical speed. Fixed-fixed and free end fixity are both possible.
Lead screws are widely used in industries and everyday appliances. In fact, they are used in robotics, lifting equipment, and industrial machinery. High-precision lead screws are widely used in the fields of engraving, fluid handling, data storage, and rapid prototyping. Moreover, they are also used in 3D printing and rapid prototyping. Lastly, lead screws are used in a wide range of applications, from measuring to assembly.

Fully threaded screw

A fully threaded screw shaft can be found in many applications. Threading is an important feature of screw systems and components. Screws with threaded shafts are often used to fix pieces of machinery together. Having fully threaded screw shafts ensures that screws can be installed without removing the nut or shaft. There are two major types of screw threads: coarse and fine. When it comes to coarse threads, UTS is the most common type, followed by BSP.
In the 1840s, a British engineer named Joseph Whitworth created a design that was widely used for screw threads. This design later became the British Standard Whitworth. This standard was used for screw threads in the United States during the 1840s and 1860s. But as screw threads evolved and international standards were established, this system remained largely unaltered. A new design proposed in 1864 by William Sellers improved upon Whitworth’s screw threads and simplified the pitch and surface finish.
Another reason for using fully threaded screws is their ability to reduce heat. When screw shafts are partially threaded, the bone grows up to the screw shaft and causes the cavity to be too narrow to remove it. Consequently, the screw is not capable of backing out. Therefore, fully threaded screws are the preferred choice for inter-fragmentary compression in children’s fractures. However, surgeons should know the potential complication when removing metalwork.
The full thread depth of a fully threaded screw is the distance at which a male thread can freely thread into the shaft. This dimension is typically one millimeter shy of the total depth of the drilled hole. This provides space for tap lead and chips. The full-thread depth also makes fully threaded screws ideal for axially-loaded connections. It is also suitable for retrofitting applications. For example, fully threaded screws are commonly used to connect two elements.
screwshaft

Ball screw

The basic static load rating of a ball screw is determined by the product of the maximum axial static load and the safety factor “s0”. This factor is determined by past experience in similar applications and should be selected according to the design requirements of the application. The basic static load rating is a good guideline for selecting a ball screw. There are several advantages to using a ball screw for a particular application. The following are some of the most common factors to consider when selecting a ball screw.
The critical speed limit of a ball screw is dependent on several factors. First of all, the critical speed depends on the mass, length and diameter of the shaft. Second, the deflection of the shaft and the type of end bearings determine the critical speed. Finally, the unsupported length is determined by the distance between the ball nut and end screw, which is also the distance between bearings. Generally, a ball screw with a diameter greater than 1.2 mm has a critical speed limit of 200 rpm.
The first step in manufacturing a high-quality ball screw is the choice of the right steel. While the steel used for manufacturing a ball screw has many advantages, its inherent quality is often compromised by microscopic inclusions. These microscopic inclusions may eventually lead to crack propagation, surface fatigue, and other problems. Fortunately, the technology used in steel production has advanced, making it possible to reduce the inclusion size to a minimum. However, higher-quality steels can be expensive. The best material for a ball screw is vacuum-degassed pure alloy steel.
The lead of a ball screw shaft is also an important factor to consider. The lead is the linear distance between the ball and the screw shaft. The lead can increase the amount of space between the balls and the screws. In turn, the lead increases the speed of a screw. If the lead of a ball screw is increased, it may increase its accuracy. If not, the lead of a ball screw can be improved through preloading, lubrication, and better mounting accuracy.

China manufacturer CZPT 20mm Lead Rolled Ball Screw for Industrial Lathe (TXR Series, Lead: 20mm, Shaft: 10mm) sector shaft adjustment screw
editor by CX 2023-04-23

China High Torque Screw Shaft for Plastic Twin Screw Extruders Machine ball screw shaft hardness

Product Description

We manufacture screw and kneading elements for co-rotating twin screw extruders ranging from 15.6 mm to 350 mm and over.
     Our manufacturing specializes in segmented screws for twin screw extruders and is optimized for flexible order handling.
Co-rotating twin screw elements for
-APV          -KOBE        -OMC
-Buhler      -KraussMaffei       -Theysohn
-Buss        -Berstorff       -Toshiba
-Clextral     -Labtech     -USEON
-Lantai     -others
-JSW     -Leistritz
-Keya     -Maris
Types of the Screw Segments
* Single Keyway    * Square Keyslot     *High torque key button     * Dual keyslot
* Involute inner spline     * Round keyslot      *Retackle spline      * Client’s requirements available

We offer a broader choice of materials:
* 40CrNiMo * WR15E * WR30
By working closely with customers in choosing optional materials,we can minimize wear and tear and associated costs.

About our Company

Joiner Machinery Co.,Ltd has several years experience in the manufacture and supply of new and refurbished wear parts for all major makes of twin-screw extruders and the Industries involved in plastics industry, chemical industry, powder coating, food food industry, wood plastic etc..
Through close working relationships with our customers we have been CZPT to fulfill their requirements. Flexibility enables us to design and manufacture standard and bespoke components for unique applications.
Through our highly trained and experienced staff we are CZPT to offer technical support and advice.
Our strengths are based on many years experience supplying the following:
* Competitive costs per unit of production
* Fast turn round for collection and delivery on refurbished parts
* Parts available from stock for a wide range of extruder makes
* Comprehensive inspection procedure on all parts prior to dispatch
* A time proven quality service
* Latest manufacturing techniques and metallurgy, ensuring consistent and reliable performance of parts
* Customized solutions to meet specific needs.
Our Production Plant

FRQ

1. Q: Are you a factory or trading company?
—-A: A factory
2. Q: Where is your factory located? How can I visit there?
—–A: Our factory is located in HangZhou, ZheJiang Province, China,
1) You can fly to HangZhou Airport directly. We will pick you up when you arrive in the airport;
All our clients, from domestic or abroad, are warmly welcome to visit us!

3.Q: What makes you different with others?
—-A: 1) Our Excellent Service
For a quick, no hassle quote just send email to us
We promise to reply with a price within 24 hours – sometimes even within the hour.

2) Our quick manufacturing time
For Normal orders, we will promise to produce within 30 working days.
As a manufacturer, we can ensure the delivery time according to the formal contract.

4.Q: How about the delivery time?
—-A: This depends on the product. Typically standard products are delivered within 30 days.

Q: What is the term of payment?
—-A: 1) T/T payment; 2) LC;

6.Q: May I know the status of my order?
—-A: Yes .We will send you information and photos at different production stage of your order. You will get the latest information in time.

US $500-2,000
/ Piece
| 10 Pieces

(Min. Order)

###

Transport Package:	Wood
Trademark:	JOINER
Origin:	Sichuan

###

Samples:	US$ 500/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

US $500-2,000
/ Piece
| 10 Pieces

(Min. Order)

###

Transport Package:	Wood
Trademark:	JOINER
Origin:	Sichuan

###

Samples:	US$ 500/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

Screw Shaft Features Explained

When choosing the screw shaft for your application, you should consider the features of the screws: threads, lead, pitch, helix angle, and more. You may be wondering what these features mean and how they affect the screw’s performance. This article explains the differences between these factors. The following are the features that affect the performance of screws and their properties. You can use these to make an informed decision and purchase the right screw. You can learn more about these features by reading the following articles.

Threads

The major diameter of a screw thread is the larger of the two extreme diameters. The major diameter of a screw is also known as the outside diameter. This dimension can’t be directly measured, but can be determined by measuring the distance between adjacent sides of the thread. In addition, the mean area of a screw thread is known as the pitch. The diameter of the thread and pitch line are directly proportional to the overall size of the screw.
The threads are classified by the diameter and pitch. The major diameter of a screw shaft has the largest number of threads; the smaller diameter is called the minor diameter. The thread angle, also known as the helix angle, is measured perpendicular to the axis of the screw. The major diameter is the largest part of the screw; the minor diameter is the lower end of the screw. The thread angle is the half distance between the major and minor diameters. The minor diameter is the outer surface of the screw, while the top surface corresponds to the major diameter.
The pitch is measured at the crest of a thread. In other words, a 16-pitch thread has a diameter of one sixteenth of the screw shaft’s diameter. The actual diameter is 0.03125 inches. Moreover, a large number of manufacturers use this measurement to determine the thread pitch. The pitch diameter is a critical factor in successful mating of male and female threads. So, when determining the pitch diameter, you need to check the thread pitch plate of a screw.
screwshaft

Lead

In screw shaft applications, a solid, corrosion-resistant material is an important requirement. Lead screws are a robust choice, which ensure shaft direction accuracy. This material is widely used in lathes and measuring instruments. They have black oxide coatings and are suited for environments where rusting is not acceptable. These screws are also relatively inexpensive. Here are some advantages of lead screws. They are highly durable, cost-effective, and offer high reliability.
A lead screw system may have multiple starts, or threads that run parallel to each other. The lead is the distance the nut travels along the shaft during a single revolution. The smaller the lead, the tighter the thread. The lead can also be expressed as the pitch, which is the distance between adjacent thread crests or troughs. A lead screw has a smaller pitch than a nut, and the smaller the lead, the greater its linear speed.
When choosing lead screws, the critical speed is the maximum number of revolutions per minute. This is determined by the minor diameter of the shaft and its length. The critical speed should never be exceeded or the lead will become distorted or cracked. The recommended operational speed is around eighty percent of the evaluated critical speed. Moreover, the lead screw must be properly aligned to avoid excessive vibrations. In addition, the screw pitch must be within the design tolerance of the shaft.

Pitch

The pitch of a screw shaft can be viewed as the distance between the crest of a thread and the surface where the threads meet. In mathematics, the pitch is equivalent to the length of one wavelength. The pitch of a screw shaft also relates to the diameter of the threads. In the following, the pitch of a screw is explained. It is important to note that the pitch of a screw is not a metric measurement. In the following, we will define the two terms and discuss how they relate to one another.
A screw’s pitch is not the same in all countries. The United Kingdom, Canada, and the United States have standardized screw threads according to the UN system. Therefore, there is a need to specify the pitch of a screw shaft when a screw is being manufactured. The standardization of pitch and diameter has also reduced the cost of screw manufacturing. Nevertheless, screw threads are still expensive. The United Kingdom, Canada, and the United States have introduced a system for the calculation of screw pitch.
The pitch of a lead screw is the same as that of a lead screw. The diameter is 0.25 inches and the circumference is 0.79 inches. When calculating the mechanical advantage of a screw, divide the diameter by its pitch. The larger the pitch, the more threads the screw has, increasing its critical speed and stiffness. The pitch of a screw shaft is also proportional to the number of starts in the shaft.

Helix angle

The helix angle of a screw shaft is the angle formed between the circumference of the cylinder and its helix. Both of these angles must be equal to 90 degrees. The larger the lead angle, the smaller the helix angle. Some reference materials refer to angle B as the helix angle. However, the actual angle is derived from calculating the screw geometry. Read on for more information. Listed below are some of the differences between helix angles and lead angles.
High helix screws have a long lead. This length reduces the number of effective turns of the screw. Because of this, fine pitch screws are usually used for small movements. A typical example is a 16-mm x 5-inch screw. Another example of a fine pitch screw is a 12x2mm screw. It is used for small moves. This type of screw has a lower lead angle than a high-helix screw.
A screw’s helix angle refers to the relative angle of the flight of the helix to the plane of the screw axis. While screw helix angles are not often altered from the standard square pitch, they can have an effect on processing. Changing the helix angle is more common in two-stage screws, special mixing screws, and metering screws. When a screw is designed for this function, it should be able to handle the materials it is made of.
screwshaft

Size

The diameter of a screw is its diameter, measured from the head to the shaft. Screw diameters are standardized by the American Society of Mechanical Engineers. The diameters of screws range from 3/50 inches to sixteen inches, and more recently, fractions of an inch have been added. However, shaft diameters may vary depending on the job, so it is important to know the right size for the job. The size chart below shows the common sizes for screws.
Screws are generally referred to by their gauge, which is the major diameter. Screws with a major diameter less than a quarter of an inch are usually labeled as #0 to #14 and larger screws are labeled as sizes in fractions of an inch. There are also decimal equivalents of each screw size. These measurements will help you choose the correct size for your project. The screws with the smaller diameters were not tested.
In the previous section, we described the different shaft sizes and their specifications. These screw sizes are usually indicated by fractions of an inch, followed by a number of threads per inch. For example, a ten-inch screw has a shaft size of 2” with a thread pitch of 1/4″, and it has a diameter of two inches. This screw is welded to a two-inch Sch. 40 pipe. Alternatively, it can be welded to a 9-inch O.A.L. pipe.
screwshaft

Shape

Screws come in a wide variety of sizes and shapes, from the size of a quarter to the diameter of a U.S. quarter. Screws’ main function is to hold objects together and to translate torque into linear force. The shape of a screw shaft, if it is round, is the primary characteristic used to define its use. The following chart shows how the screw shaft differs from a quarter:
The shape of a screw shaft is determined by two features: its major diameter, or distance from the outer edge of the thread on one side to the inner smooth surface of the shaft. These are generally two to sixteen millimeters in diameter. Screw shafts can have either a fully threaded shank or a half-threaded shank, with the latter providing better stability. Regardless of whether the screw shaft is round or domed, it is important to understand the different characteristics of a screw before attempting to install it into a project.
The screw shaft’s diameter is also important to its application. The ball circle diameter refers to the distance between the center of two opposite balls in contact with the grooves. The root diameter, on the other hand, refers to the distance between the bottommost grooves of the screw shaft. These are the two main measurements that define the screw’s overall size. Pitch and nominal diameter are important measurements for a screw’s performance in a particular application.

Lubrication

In most cases, lubrication of a screw shaft is accomplished with grease. Grease is made up of mineral or synthetic oil, thickening agent, and additives. The thickening agent can be a variety of different substances, including lithium, bentonite, aluminum, and barium complexes. A common classification for lubricating grease is NLGI Grade. While this may not be necessary when specifying the type of grease to use for a particular application, it is a useful qualitative measure.
When selecting a lubricant for a screw shaft, the operating temperature and the speed of the shaft determine the type of oil to use. Too much oil can result in heat buildup, while too little can lead to excessive wear and friction. The proper lubrication of a screw shaft directly affects the temperature rise of a ball screw, and the life of the assembly. To ensure the proper lubrication, follow the guidelines below.
Ideally, a low lubrication level is appropriate for medium-sized feed stuff factories. High lubrication level is appropriate for larger feed stuff factories. However, in low-speed applications, the lubrication level should be sufficiently high to ensure that the screws run freely. This is the only way to reduce friction and ensure the longest life possible. Lubrication of screw shafts is an important consideration for any screw.

China High Torque Screw Shaft for Plastic Twin Screw Extruders Machine ball screw shaft hardness
editor by czh 2022-12-12

China Stainless Steel D Shaft D-Ring 1/4″ Mounting Screw 0.39″/10mm Shaft for Camera Tripod Monopod or Quick Release ball screw shaft coupling

Product Description

Stainless Steel D Shaft D-ring 1/4″ Mounting Screw 0.39″/10mm Shaft for Camera Tripod Monopod or Quick Release

Item Name	All kinds of screws
Drive	philips,phil-slot,pozi,hexsocket,six-lobe,square,triangle,slotted,torx,Y & Special security drive
Material	Carbon steel/Stainless steel/Aluminum/Brass/Copper
Specification & Gauge	M0.8 – M36
Surface Finishing	(1) Zinc- Plated (2) Nickel-plated (3) Passivated (4) Tin-plated (5) Sandblast and Anodize (6) Chromate (7) Polish (8) Black Oxide (9) Dacromet(10) Hot Deep Galvanize(H. D. G. ) etc.
Heat Treatment	(1)Tempering (2)Hardening (3)Spheroidizing (4)Stress Relieving.
Standard	ISO,GB,DIN,JIS,ANSI,BSW
Manufacture Process	(1)Heading (2)washer assembly (3)Threading (4)Secondary processing (5)heat treatment (6)plating (7)Anti-slipping (8)Baking (9)QA (10)Package (11)Shipping
After sales service	We will follow up goods for every customers and help solve problem after sales.(more details prease see our Reproduction and Refund Policy)
Certificates	ISO9001:2015, MSDS,SGS,COC,Form E(CO),RohS

Applications:

1) Mechanical manufacturing.
2) Electronics
3) Furniture Products
4) Auto parts
5) Lights
6) Medical device
7) Toys
8) Digital products.
9) Buildings
10) Others

Advantages

1)Competitive price

2)Diversified rich experienced skilled workers( Over 18 years).

3)Continuance service and support.

4)Quality,reliability and long product life.

5)Mature,perfect and excellence,but simple design, OEM are available.

6)Serviced for: Foxconn Tec,Sanyo Electronics,Honeywell International,Kimball Furniture…etc

Business Conditions

MOQ	Small quantity for testing are available
Terms	FOB HangZhou /CFR /CIF/Exw
Payment	T/T 30 % deposit, 70% balance payment before shipment
Lead Time	7-25 working days,it is depand on the order quantity
Sample Availablity	Making sample within 7 days free of charge if we have existing tooling
Warranty	3 Years

FAQ

A. How to get the offer for products ?
Drawing or size details & Materials & Quantity info provided,then we will quote the best price for you.

B. How to Package ?
The items are placed in plastic bags,Then put into Hardened Carton box,Last is on the pallet. Or According to customers’ required.

C. When is the delivery time ?
Delivery will occur between 10-15 working days from order confirmed, Moved faster delivery time can be allowed if Urgently.

D.What is the MOQ ?
To start of our good business relationship, we will try our best to meet your demands. Welcome to small trial order for testing.

E.What is you payment method ?

Paypal, T/T,Westeern Union,Moneygram,or others.

Reproduction and Refund Policy

Potential Redund Issue

1. Products received do not match the picture or description.

a.return for exchange–Return the products and we will resend the order as soon as we receive confirmation that the products have shipped.

b. Return for Refund–We will refund the payment as soon as our company receives the products by return back.

2. Products do not meet quality expectations or have some other quality issues.

a.return for exchange–Customers do not need to send the products back, They can instead provide pictures that clearly shows the problems.

b. Return for refund- Customer do not need to send the products back,they can instead provide pictures that clearly shows the problems

US $0.1-0.3
/ Piece
| 200 Pieces

(Min. Order)

###

Material:	Carbon Steel
Type:	Round Head
Groove:	Sloted
Connection:	Common Bolt
Head Style:	Round
Standard:	DIN

###

Samples:	US$ 10/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Item Name	All kinds of screws
Drive	philips,phil-slot,pozi,hexsocket,six-lobe,square,triangle,slotted,torx,Y & Special security drive
Material	Carbon steel/Stainless steel/Aluminum/Brass/Copper
Specification & Gauge	M0.8 – M36
Surface Finishing	(1) Zinc- Plated (2) Nickel-plated (3) Passivated (4) Tin-plated (5) Sandblast and Anodize (6) Chromate (7) Polish (8) Black Oxide (9) Dacromet(10) Hot Deep Galvanize(H. D. G. ) etc.
Heat Treatment	(1)Tempering (2)Hardening (3)Spheroidizing (4)Stress Relieving.
Standard	ISO,GB,DIN,JIS,ANSI,BSW
Manufacture Process	(1)Heading (2)washer assembly (3)Threading (4)Secondary processing (5)heat treatment (6)plating (7)Anti-slipping (8)Baking (9)QA (10)Package (11)Shipping
After sales service	We will follow up goods for every customers and help solve problem after sales.(more details prease see our Reproduction and Refund Policy)
Certificates	ISO9001:2015, MSDS,SGS,COC,Form E(CO),RohS

###

MOQ	Small quantity for testing are available
Terms	FOB Shenzhen /CFR /CIF/Exw
Payment	T/T 30 % deposit, 70% balance payment before shipment
Lead Time	7-25 working days,it is depand on the order quantity
Sample Availablity	Making sample within 7 days free of charge if we have existing tooling
Warranty	3 Years

US $0.1-0.3
/ Piece
| 200 Pieces

(Min. Order)

###

Material:	Carbon Steel
Type:	Round Head
Groove:	Sloted
Connection:	Common Bolt
Head Style:	Round
Standard:	DIN

###

Samples:	US$ 10/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Item Name	All kinds of screws
Drive	philips,phil-slot,pozi,hexsocket,six-lobe,square,triangle,slotted,torx,Y & Special security drive
Material	Carbon steel/Stainless steel/Aluminum/Brass/Copper
Specification & Gauge	M0.8 – M36
Surface Finishing	(1) Zinc- Plated (2) Nickel-plated (3) Passivated (4) Tin-plated (5) Sandblast and Anodize (6) Chromate (7) Polish (8) Black Oxide (9) Dacromet(10) Hot Deep Galvanize(H. D. G. ) etc.
Heat Treatment	(1)Tempering (2)Hardening (3)Spheroidizing (4)Stress Relieving.
Standard	ISO,GB,DIN,JIS,ANSI,BSW
Manufacture Process	(1)Heading (2)washer assembly (3)Threading (4)Secondary processing (5)heat treatment (6)plating (7)Anti-slipping (8)Baking (9)QA (10)Package (11)Shipping
After sales service	We will follow up goods for every customers and help solve problem after sales.(more details prease see our Reproduction and Refund Policy)
Certificates	ISO9001:2015, MSDS,SGS,COC,Form E(CO),RohS

###

MOQ	Small quantity for testing are available
Terms	FOB Shenzhen /CFR /CIF/Exw
Payment	T/T 30 % deposit, 70% balance payment before shipment
Lead Time	7-25 working days,it is depand on the order quantity
Sample Availablity	Making sample within 7 days free of charge if we have existing tooling
Warranty	3 Years

Screw Sizes and Their Uses

Screws have different sizes and features. This article will discuss screw sizes and their uses. There are two main types: right-handed and left-handed screw shafts. Each screw features a point that drills into the object. Flat tipped screws, on the other hand, need a pre-drilled hole. These screw sizes are determined by the major and minor diameters. To determine which size of screw you need, measure the diameter of the hole and the screw bolt’s thread depth.

The major diameter of a screw shaft

The major diameter of a screw shaft is the distance from the outer edge of the thread on one side to the tip of the other. The minor diameter is the inner smooth part of the screw shaft. The major diameter of a screw is typically between two and sixteen inches. A screw with a pointy tip has a smaller major diameter than one without. In addition, a screw with a larger major diameter will have a wider head and drive.
The thread of a screw is usually characterized by its pitch and angle of engagement. The pitch is the angle formed by the helix of a thread, while the crest forms the surface of the thread corresponding to the major diameter of the screw. The pitch angle is the angle between the gear axis and the pitch surface. Screws without self-locking threads have multiple starts, or helical threads.
The pitch is a crucial component of a screw’s threading system. Pitch is the distance from a given thread point to the corresponding point of the next thread on the same shaft. The pitch line is one element of pitch diameter. The pitch line, or lead, is a crucial dimension for the thread of a screw, as it controls the amount of thread that will advance during a single turn.
screwshaft

The pitch diameter of a screw shaft

When choosing the appropriate screw, it is important to know its pitch diameter and pitch line. The pitch line designates the distance between adjacent thread sides. The pitch diameter is also known as the mean area of the screw shaft. Both of these dimensions are important when choosing the correct screw. A screw with a pitch of 1/8 will have a mechanical advantage of 6.3. For more information, consult an application engineer at Roton.
The pitch diameter of a screw shaft is measured as the distance between the crest and the root of the thread. Threads that are too long or too short will not fit together in an assembly. To measure pitch, use a measuring tool with a metric scale. If the pitch is too small, it will cause the screw to loosen or get stuck. Increasing the pitch will prevent this problem. As a result, screw diameter is critical.
The pitch diameter of a screw shaft is measured from the crest of one thread to the corresponding point on the next thread. Measurement is made from one thread to another, which is then measured using the pitch. Alternatively, the pitch diameter can be approximated by averaging the major and minor diameters. In most cases, the pitch diameter of a screw shaft is equal to the difference between the two.

The thread depth of a screw shaft

Often referred to as the major diameter, the thread depth is the outermost diameter of the screw. To measure the thread depth of a screw, use a steel rule, micrometer, or caliper. In general, the first number in the thread designation indicates the major diameter of the thread. If a section of the screw is worn, the thread depth will be smaller, and vice versa. Therefore, it is good practice to measure the section of the screw that receives the least amount of use.
In screw manufacturing, the thread depth is measured from the crest of the screw to the root. The pitch diameter is halfway between the major and minor diameters. The lead diameter represents the amount of linear distance traveled in one revolution. As the lead increases, the load capacity decreases. This measurement is primarily used in the construction of screws. However, it should not be used for precision machines. The thread depth of a screw shaft is essential for achieving accurate screw installation.
To measure the thread depth of a screw shaft, the manufacturer must first determine how much material the thread is exposed to. If the thread is exposed to side loads, it can cause the nut to wedge. Because the nut will be side loaded, its thread flanks will contact the nut. The less clearance between the nut and the screw, the lower the clearance between the nut and the screw. However, if the thread is centralized, there is no risk of the nut wedgeing.
screwshaft

The lead of a screw shaft

Pitch and lead are two measurements of a screw’s linear distance per turn. They’re often used interchangeably, but their definitions are not the same. The difference between them lies in the axial distance between adjacent threads. For single-start screws, the pitch is equal to the lead, while the lead of a multi-start screw is greater than the pitch. This difference is often referred to as backlash.
There are two ways to calculate the pitch and lead of a screw. For single-start screws, the lead and pitch are equal. Multiple-start screws, on the other hand, have multiple starts. The pitch of a multiple-start screw is the same as its lead, but with two or more threads running the length of the screw shaft. A square-thread screw is a better choice in applications requiring high load-bearing capacity and minimal friction losses.
The PV curve defines the safe operating limits of lead screw assemblies. It describes the inverse relationship between contact surface pressure and sliding velocity. As the load increases, the lead screw assembly must slow down in order to prevent irreversible damage from frictional heat. Furthermore, a lead screw assembly with a polymer nut must reduce rpm as the load increases. The more speed, the lower the load capacity. But, the PV factor must be below the maximum allowed value of the material used to make the screw shaft.

The thread angle of a screw shaft

The angle between the axes of a thread and the helix of a thread is called the thread angle. A unified thread has a 60-degree angle in all directions. Screws can have either a tapped hole or a captive screw. The screw pitch is measured in millimeters (mm) and is usually equal to the screw major diameter. In most cases, the thread angle will be equal to 60-degrees.
Screws with different angles have various degrees of thread. Originally, this was a problem because of the inconsistency in the threading. However, Sellers’s thread was easier to manufacture and was soon adopted as a standard throughout the United States. The United States government began to adopt this thread standard in the mid-1800s, and several influential corporations in the railroad industry endorsed it. The resulting standard is called the United States Standard thread, and it became part of the ASA’s Vol. 1 publication.
There are two types of screw threads: coarse and fine. The latter is easier to tighten and achieves tension at lower torques. On the other hand, the coarse thread is deeper than the fine one, making it easier to apply torque to the screw. The thread angle of a screw shaft will vary from bolt to bolt, but they will both fit in the same screw. This makes it easier to select the correct screw.
screwshaft

The tapped hole (or nut) into which the screw fits

A screw can be re-threaded without having to replace it altogether. The process is different than that of a standard bolt, because it requires threading and tapping. The size of a screw is typically specified by its major and minor diameters, which is the inside distance between threads. The thread pitch, which is the distance between each thread, is also specified. Thread pitch is often expressed in threads per inch.
Screws and bolts have different thread pitches. A coarse thread has fewer threads per inch and a longer distance between threads. It is therefore larger in diameter and longer than the material it is screwed into. A coarse thread is often designated with an “A” or “B” letter. The latter is generally used in smaller-scale metalworking applications. The class of threading is called a “threaded hole” and is designated by a letter.
A tapped hole is often a complication. There is a wide range of variations between the sizes of threaded holes and nut threads, so the tapped hole is a critical dimension in many applications. However, even if you choose a threaded screw that meets the requisite tolerance, there may be a mismatch in the thread pitch. This can prevent the screw from freely rotating.

China Stainless Steel D Shaft D-Ring 1/4
editor by czh 2022-12-02

China The Screw Conveyor Accessories Shaft Bearing ball screw shaft diameter

Product Description

The screw conveyor accessories shaft bearing

Introduction
Pipe screw conveyor is a mechanism that uses a rotating helical screw blade coiled around a shaft,it offers a variety of solutions for bulk materials conveying like granular and small bulk materials horizontally or aslope, meanwhile,pipe screw conveyor is very cost-effective and require minimal maintenance to operate. Pipe screw conveyor is widely used for transporting coal,ash,slag,cement,food waste, wood chips, aggregates, cereal grains, animal feed, boiler ash, meat and bone meal, municipal solid waste, and many others.

Advantages and Features
1.Whole sealing structure, no pollution to the environment,no material leakage.
2.According to working conditions, screw conveyor can be designed to multiple inlets and outlets.
3.Flexible installation type, conveyor angle can be 0-30 degree to meet varies requirement.
4.Hanging bearing is provided to connect screw blades and bear the screw body weights.
5.Adopts the method of spot welding to weld spiral blade on the screw shaft.
6.Construction material with carbon steel, stainless steel and abrasion-resistant alloys are optional.
7.Can be disassemble into several sections, save space during transportation.
8.Reducer motor brand can be domestic or imported: Tailong, SEW, Siemens etc.

Technical Parameter:

GX Screw Conveyor Technical Performance
Type	Length/m	Throughput (t/h)	Rotating speed/(r/min)	Reducer		Motor		Weight/kg
Type	Length/m	Throughput (t/h)	Rotating speed/(r/min)	Type	Speed ratio	Type	Power/kW	Weight/kg
GX200	10	9	60	YZQ250	23.34	Y90S-4	1.1	726
GX200	20	9	60	YZQ250	23.34	Y90L-4	1.5	1258
GX250	10	15.6	60	YZQ250	23.34	Y100L1-4	2.2	960
GX250	20	15.6	60	YZQ250	23.34	Y100L1-4	3	1750
GX300	10	21.2	60	YZQ350	23.34	Y100L2-4	3	1373
GX300	20	21.2	60	YZQ350	23.34	Y112M-4	4	2346
GX400	10	51	60	YZQ400	23.34	Y132S-4	5.5	1911
GX400	20	51	60	YZQ500	23.34	Y160M-4	11	2049
GX500	10	87.5	60	YZQ400	23.34	Y132M	7.5	2381
GX500	20	87.5	60	YZQ650	23.34	Y180M-4	18.5	5389
GX600	10	134.2	45	YZQ750	23.34	Y180L-4	22	3880
GX600	10	134.2	45	YZQ850	23.34	Y250M-4	55	7090

Selection Conditions

♦Material to be processed: _____	♦Working environment is indoor or outdoor:________
♦Handling capacity (Ps. It means the total	♦Working environment temperature: _______ ºC
material capacity feeding from the inlet): _____t/h	♦Upstream equipment (Ps. It means what kind of
♦Bulk Density: _____t/m3	equipment is used to feed the material): _____
♦Conveying distance(distance between	♦Downstream equipment (Ps. It means what kind of
inlet and outlet):__________m	equipment is used to discharge the material): _____
♦Material size:____mm	♦Installation form is horizontal or inclined : ________;
♦Material temperature: _______ ºC	If it is inclined,what is the inclined degree_____° ,
♦Water content:____%	and whether a supporting frame is needed:_______
♦Material is corrosive or not: ____ (Ps. Yes or No)	♦Working power supply: _____V ______HZ

We mainly provide the following equipments :

Vibrating Screen	Rotary vibrating screen
	Ultrasonic vibrating screen
	Gyratory screen
	Trommel screen
	Linear vibrating screen
	Circular vibrating screen
	Dewatering screen
	Vibrating feeder
Belt Conveyor	Belt conveyor
	Sidewall belt conveyor
	Portable belt conveyor
	Shuttle conveyor
	Tripper
Bucket Elevator	Efficient bucket elevator
	Belt bucket elevator
	Ring chain bucket elevator
	Plate chain bucket elevator
	Cement bucket elevator
	Silo bucket elevator
Screw Conveyor	U-type screw conveyor
	Cement screw conveyor
	Pipe screw conveyor
Scraper Conveyor	Horizontal scraper chain conveyor
	Incline scraper chain conveyor
	Grain scraper chain conveyor

US $641-9,841
/ Set
| 1 Set

(Min. Order)

###

Type:	Screw Conveyor
Structure:	Inclining Conveyor
Material:	Carbon Steel
Material Feature:	Fire Resistant
Certification:	ISO9001:2008, ISO9001:2000, CE
Energy Saving:	Energy Saving

###

Samples:	US$ 894/Set 1 Set(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

GX Screw Conveyor Technical Performance
Type	Length/m	Throughput (t/h)	Rotating speed/(r/min)	Reducer		Motor		Weight/kg
Type	Length/m	Throughput (t/h)	Rotating speed/(r/min)	Type	Speed ratio	Type	Power/kW	Weight/kg
GX200	10	9	60	YZQ250	23.34	Y90S-4	1.1	726
GX200	20	9	60	YZQ250	23.34	Y90L-4	1.5	1258
GX250	10	15.6	60	YZQ250	23.34	Y100L1-4	2.2	960
GX250	20	15.6	60	YZQ250	23.34	Y100L1-4	3	1750
GX300	10	21.2	60	YZQ350	23.34	Y100L2-4	3	1373
GX300	20	21.2	60	YZQ350	23.34	Y112M-4	4	2346
GX400	10	51	60	YZQ400	23.34	Y132S-4	5.5	1911
GX400	20	51	60	YZQ500	23.34	Y160M-4	11	2049
GX500	10	87.5	60	YZQ400	23.34	Y132M	7.5	2381
GX500	20	87.5	60	YZQ650	23.34	Y180M-4	18.5	5389
GX600	10	134.2	45	YZQ750	23.34	Y180L-4	22	3880
GX600	10	134.2	45	YZQ850	23.34	Y250M-4	55	7090

###

♦Material to be processed: _____	♦Working environment is indoor or outdoor:________
♦Handling capacity (Ps. It means the total	♦Working environment temperature: _______ ºC
material capacity feeding from the inlet): _____t/h	♦Upstream equipment (Ps. It means what kind of
♦Bulk Density: _____t/m3	equipment is used to feed the material): _____
♦Conveying distance(distance between	♦Downstream equipment (Ps. It means what kind of
inlet and outlet):__________m	equipment is used to discharge the material): _____
♦Material size:____mm	♦Installation form is horizontal or inclined : ________;
♦Material temperature: _______ ºC	If it is inclined,what is the inclined degree_____° ,
♦Water content:____%	and whether a supporting frame is needed:_______
♦Material is corrosive or not: ____ (Ps. Yes or No)	♦Working power supply: _____V ______HZ

###

Vibrating Screen	Rotary vibrating screen
	Ultrasonic vibrating screen
	Gyratory screen
	Trommel screen
	Linear vibrating screen
	Circular vibrating screen
	Dewatering screen
	Vibrating feeder
Belt Conveyor	Belt conveyor
	Sidewall belt conveyor
	Portable belt conveyor
	Shuttle conveyor
	Tripper
Bucket Elevator	Efficient bucket elevator
	Belt bucket elevator
	Ring chain bucket elevator
	Plate chain bucket elevator
	Cement bucket elevator
	Silo bucket elevator
Screw Conveyor	U-type screw conveyor
	Cement screw conveyor
	Pipe screw conveyor
Scraper Conveyor	Horizontal scraper chain conveyor
	Incline scraper chain conveyor
	Grain scraper chain conveyor

US $641-9,841
/ Set
| 1 Set

(Min. Order)

###

Type:	Screw Conveyor
Structure:	Inclining Conveyor
Material:	Carbon Steel
Material Feature:	Fire Resistant
Certification:	ISO9001:2008, ISO9001:2000, CE
Energy Saving:	Energy Saving

###

Samples:	US$ 894/Set 1 Set(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

GX Screw Conveyor Technical Performance
Type	Length/m	Throughput (t/h)	Rotating speed/(r/min)	Reducer		Motor		Weight/kg
Type	Length/m	Throughput (t/h)	Rotating speed/(r/min)	Type	Speed ratio	Type	Power/kW	Weight/kg
GX200	10	9	60	YZQ250	23.34	Y90S-4	1.1	726
GX200	20	9	60	YZQ250	23.34	Y90L-4	1.5	1258
GX250	10	15.6	60	YZQ250	23.34	Y100L1-4	2.2	960
GX250	20	15.6	60	YZQ250	23.34	Y100L1-4	3	1750
GX300	10	21.2	60	YZQ350	23.34	Y100L2-4	3	1373
GX300	20	21.2	60	YZQ350	23.34	Y112M-4	4	2346
GX400	10	51	60	YZQ400	23.34	Y132S-4	5.5	1911
GX400	20	51	60	YZQ500	23.34	Y160M-4	11	2049
GX500	10	87.5	60	YZQ400	23.34	Y132M	7.5	2381
GX500	20	87.5	60	YZQ650	23.34	Y180M-4	18.5	5389
GX600	10	134.2	45	YZQ750	23.34	Y180L-4	22	3880
GX600	10	134.2	45	YZQ850	23.34	Y250M-4	55	7090

###

♦Material to be processed: _____	♦Working environment is indoor or outdoor:________
♦Handling capacity (Ps. It means the total	♦Working environment temperature: _______ ºC
material capacity feeding from the inlet): _____t/h	♦Upstream equipment (Ps. It means what kind of
♦Bulk Density: _____t/m3	equipment is used to feed the material): _____
♦Conveying distance(distance between	♦Downstream equipment (Ps. It means what kind of
inlet and outlet):__________m	equipment is used to discharge the material): _____
♦Material size:____mm	♦Installation form is horizontal or inclined : ________;
♦Material temperature: _______ ºC	If it is inclined,what is the inclined degree_____° ,
♦Water content:____%	and whether a supporting frame is needed:_______
♦Material is corrosive or not: ____ (Ps. Yes or No)	♦Working power supply: _____V ______HZ

###

Vibrating Screen	Rotary vibrating screen
	Ultrasonic vibrating screen
	Gyratory screen
	Trommel screen
	Linear vibrating screen
	Circular vibrating screen
	Dewatering screen
	Vibrating feeder
Belt Conveyor	Belt conveyor
	Sidewall belt conveyor
	Portable belt conveyor
	Shuttle conveyor
	Tripper
Bucket Elevator	Efficient bucket elevator
	Belt bucket elevator
	Ring chain bucket elevator
	Plate chain bucket elevator
	Cement bucket elevator
	Silo bucket elevator
Screw Conveyor	U-type screw conveyor
	Cement screw conveyor
	Pipe screw conveyor
Scraper Conveyor	Horizontal scraper chain conveyor
	Incline scraper chain conveyor
	Grain scraper chain conveyor

What Are Screw Shaft Threads?

Coefficient of friction between the mating surfaces of a nut and a screw shaft

Helix angle

Thread angle

Material

Self-locking features

China The Screw Conveyor Accessories Shaft Bearing ball screw shaft diameter
editor by czh 2022-11-27

China CNC Precision stepper motor actuator shaft support hiwin linear guide ball miniature linear guide screw screw shaft condition monitoring

Condition: New
Warranty: 3 months
Applicable Industries: Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Farms, Printing Shops, Construction works , Energy & Mining
Weight (KG): 1
Showroom Location: None
Video outgoing-inspection: Not Available
Machinery Test Report: Not Available
Marketing Type: New Product 2571
Warranty of core components: 6 Months
Core Components: PLC, Engine, Bearing, Gearbox, Motor, Pressure vessel, Gear, Pump
Structure: Flexible
Material: Brass Steel Stainless steel Aluminum
Coatings: Black Oxide
Torque Capacity: custome
Model Number: OEM
Processing Type: NC turning, grinding
Certification: ISO9001
tolerance: 0.001 or Custome
Port: ZheJiang / HangZhou

Product Overviews

Size	Customer’s Request
MOQ	Depends on the drawing
Brand	BRM
Sample	Available
Feature	High Qulity and High Precision
Warranty	3 months
Package	PP bag/Carton or OEM
Diameter	As per Customer’s requirement
Tolerance	0.001mm or Custom
OEM&ODM	Accepted
Main process	Cnc lathe turning
Place of Origin	ZheJiang ,China
Main material	Brass, Steel,Stainless steel, Aluminum
Product Type	Shaft parts,Stainless Steel Shafts ,Long Shafts,Output Shafts,Motor Shaft etc.

OEM&ODM

Welcome OEM/ODM Order!
Material Available	1, Iron: 1213, 12L14,1215,ect2, Steel:C45(K1045), C46(K1046),C20,ect3, Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS4204, Brass:C36000 ( C26800), C37700,( HPb59),C38500(HPb58),C27200(CuZn37),C28000(CuZn40)5,Bronze: C51000, C52100, C54400, etc6,Aluminum: Al6061, Al6063,Al7571,Titanium8,Plastic:PP(Polypropylene),PC(Polycarbonate),PTFE(Teflon),POM,Nylon,ect9,OEM according to your request
Surface treatment	Anodized different color,Mini polishing&brushing,Electronplating(zinc plated,nickel plated,chrome plated), Power coating&PVD coating,Laser marking&Silk screen,Printing,Welding,Harden etc.
Process Available	Precision Stamping:Punching,Piercing,Shearing,Blanking,Bending,Drawing,Annealing CNC Machining:Auto lathing/turning,Milling,Grinding,Tapping,Drilling,Casting,Laser cutting,Injection Molding
Lead Time(Rough)	Samples:7-10 workdays,Bulk Goods:12-15 Workdays (Please check the exact lead time when actual production )

Machining Capacity

Max OD.	150mm
Min OD.	0.6mm
Max Length	1000mm
OD Tolerance	Centerless Grinding 0.001mm / Cylindrical Grinding 0.005mm
Roundness Tolerance	Centerless Grinding 0.0005mm / Cylindrical Grinding 0.003mm
Run-out Tolerance	Centerless Grinding 0.001mm / Cylindrical Grinding 0.01mm
Roughness Tolerance	Centerless Grinding Rz0.4 / Cylindrical Grinding Rz2.0

Product Display

Company Profile
Since our inception in 2006,BRM&ATM Group has focused primarily on manufacturing high-precision shafts and hardware components for export.Thanks to decades of steady growth and accumulation.We collaborate with industry leaders.

From Germany,Japan,and Switzerland,BRM&ATM has imported testing equipment and high-precision production machines.Automotive,home appliances,communication,machinery and instrumentation, aerospace,and other industries utilize our products extensively.These goods are supplied to numerous internationally renowned businesses,including Valeo,Siemens,Brose,MAGNA,Bosch,MTD,Karcher,Nidec,Mitsuba,SONY,B&D,Liteon,Canon,HP,and a great number of others.

We have successively obtained and maintained our certifications in ISO9001,QS9000:1998,ISO/TS16949:2002, and ISO14001:2004.Besides,we are a long-time Green Partner of Sony.
We opened a factory that is more than 30,000 square meters in size and employs more than 1,000 people.Over 2 billion shafts are produced annually.

Factory Environment

CNC Equipment

Inspection &Lab Equipment

Production equipment Quantity

Processing equipment	The number of
CNC lathe	233
Automatic lathe	6
Automatic car instrument	34
Cylindrical grinding machine	12
Centerless grinding	116
Milling machine	5
Gear hobbing machine	11
CNC horizontal gear hobbing machine	1
Thread rolling machine	26
Mesh belt furnace	2
High frequency equipment	4
Nitriding equipment	6
Cleaning equipment	6

Inspection equipment Quantity

The name of the instrument	The number of
The projector	29
Digital tool microscope	1
Roundness instrument	5
Roughness meter	5
Three coordinates measuring instrument	1
Ultrasonic flaw detector	1
Hardness tester	11
Fluorescent coating thickness gauge	1
Salt spray testing machine	1
Outer diameter measuring instrument	1
Metallographic microscope	1
Gear meshing apparatus	1
Gear measuring instrument	1
Gear beat detector	1
Alignment instrument	1
Digital pneumatic measurement instrument	3
Phosphor powder flaw detector	1

Logistics Services

custom

FAQ
1: How can I get shaft sample?
Sample fee will be free if we have in stock, you just need to pay the shipping cost is OK.

2: How can I get the quotation?
Please send us information for quote: drawing, material, weight, quantity and request,w can accept PDF, ISGS, DWG, STEP file format.If you don’t have drawing, please send the sample to us,we can quote based on your sample too.

3: Can you give me help if my products are very urgent?
Yes, We can work overtime and add a few machines to produce these products if you need it urgently.

4:Do you provide samples ? is it free or extra ?
Yes, we could offer the sample for free charge but do not pay the cost of freight.

5: I want to keep our design in secret, can we sign NDA?
Sure, we will not display any customers’ design or show to other people, we can sign NDA
GET INTO THE STORE

Screw Shaft Types

A screw shaft is a cylindrical part that turns. Depending on its size, it is able to drive many different types of devices. The following information outlines the different types of screws, including their sizes, material, function, and applications. To help you select the right screw shaft, consider the following factors:
screwshaft

Size

A screw can come in a variety of shapes and sizes, ranging from a quarter to a quarter-inch in diameter. A screw is a cylindrical shaft with an inclined plane wrapped around it, and its main function is to fasten objects together by translating torque into a linear force. This article will discuss the dimensions of screws and how to determine the size of a screw. It is important to note that screw sizes can be large and small depending on the purpose.
The diameter of a screw is the diameter of its shaft, and it must match the inner diameter of its nuts and washers. Screws of a certain diameter are also called machine screws, and they can be larger or smaller. Screw diameters are measured on the shaft underneath the screw head. The American Society of Mechanical Engineers (ASME) standardized screw diameters in 3/50-inch to 16 (3/8-inch) inches, and more recently, sizes were added in U.S. fractions of an inch. While shaft and head diameters are standardized, screw length may vary from job to job.
In the case of the 2.3-mm screw group, the construct strength was not improved by the 1.2-mm group. The smaller screw size did not increase the strength of the construct. Further, ABS material did not improve the construct strength. Thus, the size of screw shaft is an important consideration in model design. And remember that the more complex your model is, the larger it will be. A screw of a given size will have a similar failure rate as a screw of a different diameter.
Although different screw sizes are widely used, the differences in screw size were not statistically significant. Although there are some limitations, screws of different sizes are generally sufficient for fixation of a metacarpal shaft fracture. However, further clinical studies are needed to compare screw sizes for fracture union rates. So, if you are unsure of what size of screw shaft you need for your case, make sure to check the metric chart and ensure you use the right one.
screwshaft

Material

The material of a screw shaft plays an important role in the overall performance of a screw. Axial and central forces act to apply torque to the screw, while external forces, such as friction, exert a bending moment. The torsional moments are reflected in the torque, and this causes the screw to rotate at a higher rate than necessary. To ensure the longevity of the screw, the material of the screw shaft should be able to handle the bending moment, while the diameter of the shaft should be small enough to avoid causing damage.
Screws are made from different metals, such as steel, brass, titanium, and bronze. Manufacturers often apply a top coating of chromium, brass, or zinc to improve corrosion resistance. Screws made of aluminum are not durable and are prone to rusting due to exposure to weather conditions. The majority of screw shafts are self-locking. They are suited for many applications, including threaded fasteners, C-clamps, and vises.
Screws that are fabricated with conical sections typically feature reduced open cross-sectional areas at the discharge point. This is a key design parameter of conical screw shafts. In fact, reductions of up to 72% are common across a variety of applications. If the screw is designed to have a hard-iron hanger bearing, it must be hardened. If the screw shaft is not hardened, it will require an additional lubricant.
Another consideration is the threads. Screw shafts are typically made of high-precision threads and ridges. These are manufactured on lathes and CNC machines. Different shapes require different materials. Materials for the screw shaft vary. There are many different sizes and shapes available, and each one has its own application. In addition to helical and conical screw shafts, different materials are also available. When choosing material, the best one depends on the application.
The life of the screw depends on its size, load, and design. In general, the material of the screw shaft, nut body, and balls and rollers determine its fatigue life. This affects the overall life of the screw. To determine whether a specific screw has a longer or shorter life, the manufacturer must consider these factors, as well as the application requirements. The material should be clean and free of imperfections. It should be smooth and free of cracks or flaking, which may result in premature failure.

Function

The function of a screw shaft is to facilitate the rotation of a screw. Screws have several thread forms, including single-start, double-start and multi-start. Each form has its own advantages and disadvantages. In this article we’ll explore each of them in detail. The function of a screw shaft can vary based on its design, but the following are common types. Here are some examples of screw shaft types and their purposes.
The screw’s torque enables it to lift objects. It can be used in conjunction with a bolt and nut to lift a load. Screws are also used to secure objects together. You can use them in screw presses, vises, and screw jacks. But their primary function is to hold objects together. Listed below are some of their main functions. When used to lift heavy loads, they can provide the required force to secure an object.
Screws can be classified into two types: square and round. Square threads are more efficient than round ones because they apply 0deg of angle to the nut. Square threads are also stronger than round threads and are often used in high-load applications. They’re generally cheaper to manufacture and are more difficult to break. And unlike square threads, which have a 0deg thread angle, these threads can’t be broken easily with a screwdriver.
A screw’s head is made of a series of spiral-like structures that extend from a cylindrical part to a tip. This portion of the screw is called the shank and is made of the smallest area. The shank is the portion that applies more force to the object. As the shaft extends from the head, it becomes thinner and narrow, forming a pointed tip. The head is the most important part of the screw, so it needs to be strong to perform its function.
The diameter of the screw shaft is measured in millimeters. The M8 screw has a thread pitch of 1.25 mm. Generally, the size of the screw shaft is indicated by the major and minor diameter. These dimensions are appended with a multiplication sign (M8x1).
screwshaft

Applications

The design of screws, including their size and shape, determines their critical rotating speeds. These speeds depend on the threaded part of the screw, the helix angle, and the geometry of the contact surfaces. When applied to a screw, these limits are referred to as “permissible speed limits.” These maximum speeds are meant for short periods of time and optimized running conditions. Continuous operation at these speeds can reduce the calculated life of a nut mechanism.
The main materials used to manufacture screws and screw shafts include steel, stainless steel, titanium, bronze, and brass. Screws may be coated for corrosion resistance, or they may be made of aluminium. Some materials can be threaded, including Teflon and nylon. Screw threads can even be molded into glass or porcelain. For the most part, steel and stainless steel are the most common materials for screw shafts. Depending on the purpose, a screw will be made of a material that is suitable for the application.
In addition to being used in fasteners, screw shafts are used in micrometers, drillers, conveyor belts, and helicopter blades. There are numerous applications of screw shafts, from weighing scales to measuring lengths. If you’re in the market for a screw, make sure to check out these applications. You’ll be happy you did! They can help you get the job done faster. So, don’t delay your next project.
If you’re interested in learning about screw sizing, then it’s important to know the axial and moment loads that your screws will experience. By following the laws of mechanics and knowing the load you can calculate the nominal life of your screw. You can also consider the effect of misalignment, uneven loading, and shocks on your screw. These will all affect the life of your screw. Then, you can select the right screw.

China CNC Precision stepper motor actuator shaft support hiwin linear guide ball miniature linear guide screw screw shaft condition monitoring
editor by czh

China Customized China Shaft Supplier CNC Machining Sleeve Coupling Drive Screw Stepped Steel Shaft ball screw shaft material

Structure: Customer’s Requirement
Material: Custom, Stainless Steel/Aluminum/Steel/Brass/Iron
Coatings: Customer’s Requirement
Torque Capacity: Customers’requirements
Model Number: Customized
Surface Treatment: Passivation/Polishing/Anodizing/Plating
Equipment: CNC Lathe Machines
Process: CNC Machining
Tolerance: 0.01-0.05mm
Surface Roughness: Ra0.8
Application: Industrial Equipment
ODM/OEM: Available
Certificate: BV, TUV, SGS, ISO9000
MOQ: 1 Piece
Packaging Details: CNC Machining Part Packing: Method 1: Shrink film, then bulk loading Method 2: Shrink film + box + pallet/ wooden case Method 3: PP + wooden case Method 4: As per customers’ requirements or negotiated Packing sizes decided by product sizes
Port: HangZhou

Company Information
Some Customers
Certifications

Available Material

Stainless Steel	SS201, SS301, SS303, SS304, (SS304 FOOD GRADE), SS316, SS316L, SS416 etc.
Steel	Mild steel, Carbon steel, 4140, 4340, Q235, Q345B, 20#, 45# etc
Brass	HPb63, HPb62, HPb61, HPb59, H59, H68, H80, H90 etc
Copper	C11000,C12000,C12000 C36000 etc
Aluminum	AL6061, Al6063, AL6082, AL7075, AL5052, A380 etc
Iron	A36, 45#, 1213, 12L14, 1215 etc.
Plastic	ABS, PC, PE, POM, Delrin, Nylon, plastic, PP,PEI, Peek etc.

Surface Treatment

Aluminum parts	Stainless Steel parts	Steel	Plastic
Clear Anodized	Polishing	Powder Coated	Painting
Color Anodized	Polishing	Zinc plating	Chrome plating
Sandblast Anodized	Passivating	Oxide black	polishing
Chemical Film	Sandblasting	Nickel plating	Sandblast
Brushing	Laser engraving	Chrome plating	Laser engraving
Polishing		Carburized
Chroming		Heat treatment

Packaging & Shipping
FAQ

Screws and Screw Shafts

Machined screw shaft

Ball screw nut

Self-locking property of screw shaft

Materials used to manufacture screw shaft

China Customized China Shaft Supplier CNC Machining Sleeve Coupling Drive Screw Stepped Steel Shaft ball screw shaft material
editor by czh