Tag Archives: lead screw motor

China 12V 6Rpm DC Worm Reduction Geared Micro Motor Ultra Low Speed Electric Motor for DIY 370 with lead screw shaft screw shaft sizes

Warranty: Other
Model Number: 46GF-RK 370
Usage: Home Appliance, Medical Equipment
Type: Micro Motor
Torque: 0.38kgf.cm
Construction: Permanent Magnet
Commutation: Brush
Protect Feature: Totally Enclosed
Speed(RPM): 120rpm
Continuous Current(A): 60mA
Efficiency: IE 1
Gears: Metal Spur
Motor type: Dc Brush Gear Motor
Feature: High Torque Low Rpm
Weight: 400g
Packaging Details: plastic or foam packing
Port: HangZhou

DOOR LOCK GEAR MOTOR
Main voltage: 6VDC 12VDC 24VDC
Voltage range: 3v-24v
Maximum power: 12W
Output shaft: conventional short shaft, long shaft, screw rod M6, double output shaft and other customized.
Deceleration ratio: 52,65,80,112,158,180,200,255,337, abec 9 bearing size Deep groove ball bearing 608 2RS 8227MM skateboard bearings 564,1019 (the maximum speed ratio can be 1019:1, 2rpm / min)
No load speed: 2 RPM ~ 115rpm

Typical application:
Automatic fingerprint lock motor, password lock deceleration motor, window opener, door opener, micro winch,
face recognition lock motor, medical equipment, household appliances, mechanical equipment, lifting equipment,
kitchen equipment, Lawn mower air filter 11013-7571 agricultural machinery parts with low price factory supply robot, intelligent toy, etc.

Motor characteristic example:

MODEL VOLTAGE NO LOAD ON LOAD STALL
Rated SPEED CURRENT SPEEDCURRENTOUTPUTTORQUE TORQUE CURRENT
Vr/minmAr/minmAWKgf.cmKgf.cmmA
46GF69-370
121206010130030.382.51.7
46GF100-370
1265604530030.753.01.7
46GF180-3701245603630031.136.01.7
46GF330-37024244018300124.1012.50.9
46GF950-3702494072201211.542.00.9
46GF69-370
12 12060 101300 3 0.38 2.5 1.7
46GF100-370 1265 60 45300 3 0.75 3.0 1.7

Appearance Size/mm

Production Process
Company Information
About us

  • More than 50 sets automatic manufacturing equipment and detecting instruments.
  • R&D engineer group with practised experience, and long-term customization
  • Professional technical experience and reliable after-sale service
  • Good cost control and high cost performance
  • ISO9001 quality management system certification
  • Up to 50,000 motors daily output
  • Our Services Customization service as below are available

    Packaging & Shipping
    FAQ
    Q: Are you trading company or manufacturer ?A: We are factory.
    Q: How long is your delivery time?A: Generally it is 5-10 days if the goods are in stock. or it is 20-30 days if the goods are not in stock, it is according to quantity.
    Q: Do you provide samples ? is it free or extra ?A: The sample fee is according to the stock and cost.
    Q: What is your terms of payment ?A: Payment=1000USD, 30% T/T in advance ,balance before shippment.

    Screw Shaft Types

    If you’re looking for a screw shaft, but aren’t sure which type to buy, you’re in luck. In this article, we’ll talk about the different types, including Threaded shank, Round head, and Machined. Once you’ve read it, you’ll know which type to buy. Then, you can decide whether you want a ball screw nut or a threaded shank.

    Machined screw shafts

    Besides the standard stainless steel shaft, manufacturers also provide a variety of other materials, such as titanium, bronze, and brass. In addition to stainless steel, manufacturers also provide a variety of top-coating options, including zinc, brass, and chromium. Aluminum screws are not particularly durable and are easily affected by weather. Most screw shafts feature self-locking mechanisms. They are especially useful in C-clamps, vises, and screw-top container lids.
    For applications where accuracy is vital, a ball screw shaft needs to be annealed. A heat treatment can be performed on the ball screw shaft to ensure that both ends are heated evenly. In this process, the shaft will be more durable, while maintaining its high-precision properties. These screw shafts are a key component in computer-controlled motion-control systems, wire bonding, and other industries that require high-precision and high-quality performance.
    Depending on the material used, screw shafts can be made of stainless steel or titanium. High-precision CNC machines and lathes are typically used to manufacture screw shafts. Various shapes and sizes are available, each with a specific application. Whether you need a small or large screw, you can find one to fit your needs. And since each size requires a different material, your choice of material is important as well.
    In general, the materials used for machining screw shafts are steel, stainless steel, titanium, brass, bronze, and aluminum. Metals that resist corrosion are also commonly used. Other materials for screw shafts are Teflon, nylon, and nylon. You can also find threaded screw shafts in materials such as porcelain, glass, and ceramic. If you want to use your screws in a unique material, consider purchasing a customized one.
    screwshaft

    Ball screw nuts

    If you have a screw shaft, the last thing you want to worry about is the ball nut slipping off. To prevent this, you can place a temporary stop in the shaft’s grooves to ensure that the ball nut does not slide off. When you remove the stop, you can then install the ball screw nut. But, before you can install the ball screw nut, you have to make sure that you have a good grip on the shaft.
    When selecting ball screw nuts, it’s important to consider how much preload you need to apply to avoid excessive backlash. Preloading eliminates this problem by making the ball nut compact. It also prevents backlash, which is lost motion caused by clearance between the ball and nut. Backlash disrupts repeatability and accuracy. This is where spacer preloading comes in. You can insert a spacer between the two ball nuts to transmit the force to the nut. However, you should keep in mind that this method reduces the load capacity of the ball screw.
    The critical speed of a screw is the maximum rotating speed before it whips. This critical speed is influenced by several factors, including the diameter of the screw shaft, the number of support elements, and the material. By adjusting these factors, you can reduce the number of components used and the amount of time it takes to assemble the screw shaft. In addition, you can also reduce the number of components and avoid stacking tolerances. However, the critical speed of plastic nuts is limited due to sliding friction.
    The ball screw nut has several characteristics that make it unique. Its most prominent feature is the presence of ball bearings. These balls help reduce friction between the screw nut and the shaft. Without ball bearings, the friction would be too high to function properly. Another important characteristic is the groove profile of the nut and ball. These two features ensure that the ball and the nut meet at two points. You’ll be amazed by the results of the work of these ball screw nuts.
    screwshaft

    Threaded shank

    Wood screws are usually not fully threaded because the shank has an unthreaded portion at the top. This shoulder part forces the screw to compress two pieces of wood, which prevents the screw from overheating and compromising the materials strength. As the screw is threaded partially up, it is not as difficult to remove as a fully threaded screw. However, it is important to note that a wood screw will not hold as tightly as one with a fully threaded shank.
    In addition to being universal, screw threads can be of different sizes. For example, a M8 screw has a thread pitch of 1.25 mm. To avoid confusion, screw thread pitches are commonly given with a multiplication sign. For example, M8x1 means that the screw is eight mm in diameter but has a thread pitch of one mm per 360-degree rotation. Those who are not familiar with these dimensions may find it confusing.
    The OD of the threaded portion of a bolt is generally smaller than the OD of the nut. If the shank is too deep for the nut to fit, the threads may bottom out. This is why it’s important to use a thread-cutting bit with a small thread diameter. You can use a micrometer or caliper to measure the thread diameter. This tool will also allow you to easily identify which screw size fits where and how well.
    The metric system is the most widely used. Fasteners with DIN numbers are generally metric in size. This makes them very useful for industrial settings. You can find metric-sized screws anywhere, as long as you buy them from a reputable manufacturer. These fasteners also come with a dog point, which is used for safety wire. If the screw needs to be replaced, the shank can be drilled with a hole for a safety wire or for a dog-point.

    Round head

    A round head screw is the most common type used for machine screws. Other common types include truss head, flat head, and hexed head. Each has a different profile and are used for different purposes. A round head screw is typically wider than a flat or a hexed head, and has a slightly rounded surface. These screws are useful for projects involving sheet metal or sheet-metal parts. Round heads are usually slightly wider than a hex head screw, and they may also be used as a substitute for washers in certain applications. However, truss heads are not necessary for every project.
    A wood screw has a smooth shank that protrudes above the surface of the material it is attaching. A metal screw has a threaded shaft that is fully threaded from head to point, and a fully threaded shaft provides more bite. Two common head styles are round head and pan head. If the task requires the screw to be flush or countersunk, the round head will be the best choice.
    Another type is the Reed & Prince screw drive. These are similar to Phillips screws but have a 75-degree V shape. They are commonly used in marine hardware and are also known as BNAE NFL22-070. This type is also used for steel plate hangers. In addition to round head and pan head screws, there are a variety of other screw types. You can even get a head with a slotted head if you know where to look.
    Screw diameters are specified according to the ISO 261 or ISO 262 standards. An M8 screw has a diameter of 8.25 mm. The M8 screw has a pitch of 1.25 mm, which is equivalent to one mm per 360 degrees. There are several other standard screw sizes and thread diameters available. You can find them all by consulting the relevant standards. But remember, the metric system is the most popular.
    screwshaft

    Self-locking mechanism

    A self-locking mechanism for a screw shaft is a device that secures the screw to its supporting member in a failure position. The locking mechanism provides a positive connection between the screw shaft and the control surface during normal operation, and locks the screw to its supporting member when the screw fails. Previous attempts to solve this problem have typically used secondary nuts with free play on the screw, which were intentionally designed to jam when loaded. However, such a device can be unreliable, which is why the present invention offers a more robust and reliable locking mechanism.
    The self-locking function of a screw depends on several factors, including its pitch angle and the coefficient of friction of the threads. The angle of friction must be less than the tangent of the material pairing to prevent untightening of the screw. Screws with self-locking mechanisms have an efficiency e lower than 50%, which is less than half. Self-locking screws also have the benefit of being less efficient than a standard screw.
    Unlike a normal screw, a self-locking screw can be turned in either direction. The nut 22 rotates with the screw shaft, and the member 23 is translated in an axial direction. Regardless of the direction of the rotation of the screw, this axial translation will result in the opposite moment to that input moment. While screw self-locking mechanisms are typically less expensive, they are more reliable and durable.
    Another important feature of self-locking screws is that they are not susceptible to independent loosening. The screw cannot rotate without a certain amount of torque. In addition, a self-locking screw shaft must have a small wedge with a smaller half-angle than the arctangent of the static friction. This means that the torque applied by the driver must be greater than the torque needed to overcome the friction.

    China 12V 6Rpm DC Worm Reduction Geared Micro Motor Ultra Low Speed Electric Motor for DIY 370 with lead screw shaft     screw shaft sizesChina 12V 6Rpm DC Worm Reduction Geared Micro Motor Ultra Low Speed Electric Motor for DIY 370 with lead screw shaft     screw shaft sizes
    editor by czh 2023-03-03

    China best NEMA 17 2 Phase 42mm Threaded Rod 8mm Diameter External Lead Screw Stepper Motor (42SHD0410-300NT) with Good quality

    Product Description

    NEMA 17 External Lead Screw Hybrid Stepper Motor (42SHD571-300NT)

    1.Please feel free to contact us!
    2.Motor Name:NEMA17 Hybrid Stepper Motor
    3.Size:Nema 17(42*42mm)
    4.Feature:High precision, low inertia, low noise,small size,mooth movement
    5.The Outline Drawing of nema 17 stepper motor

    HYBRID STEPPING MOTOR 35SHD0301-12 Casun
    General Specification Electrical Specification
    Step Angle 1.8° Rated Voltage 12V dc
    Number of Phase 2 Rated Current 0.4A
    Insulation Resistance 100MΩmin. (500V DC) Resistance per phase 30Ω±10%
    Insulation Class Class B Inductance per Phase 45mH±20%
    Rotor Inertia 72g.cm² Holding torque 450mN.m
    Mass 0.38kg Detent torque 20mN.m

    Our company offers variety of products which can meet your multifarious demands.

    We adhere to the management principles of “quality first, customer first and credit-based” since the establishment of the company and always do our best to satisfy potential needs of our customers.

    Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.

    Description:
    The motor adopts the unique precision technology of stator rotor,its structure is accurate,even and smooth,high precision inner hole, smoothand accurate running process without losing step.
    The motor was inspected with precision instruments before it was sold.

    1.We promise that more than 1 year warranty for all products.
    2.We promise high quality of our products.
    3.We promise best services for customers.

    If you have interests in our products or any questions about our products,please don’t hesitate to contact us,our sales team can provide the information what you want to know.

    If we are not online, please leave your name and your contact details,as email, , ,trademanager and your telephone number,we will contact you as soon as possible in 2 hours.

    Superiority:

    1.High precision /High accuracy
    2.Low noise
    3.Large torque/high torque
    4.Smooth operation
    5.High temperature resistance
    6.Small size
    7.Low inertia

    Note:
    1.(*) Non-captive type (N), External type (E) or Captive type (C) is available, and please specify it with (*) when ordering.
    2.We also could manufacture the custom stepper motors, according to the customer’s requirements.

    Remarks:

    We are the source manufacturer, complete product model, rich production experience, can accept drawings custom stepper motor (including shaft processing, outlet mode, etc.)
    Motor wiring is optional (stock has ordinary line, 1M DuPont line, 1M XH 2.54 cable , 1M 2510 cable)

    Note :/Attention Please:
    Make sure the motor connect to a constant current or chopper drive controller before you test motor.
    Connecting the motor directly to a power supply will destroy the motor.

    *Note:We can also manufacture products according to customer’s requirements.

    1.Motors production
    All the proucts we sold here are manufactured by HangZhou FUDE  Technology Co., Ltd.,China.

    2.Motors selection
    Please contact us to confirm the model and other details of the motor before purchase.

    3.Payment
    We can serve samples and accept fully prepayment only .50% advance is needed for bulk purchase and balance  before shipment .Paypal, Western Union, T/T are all accepted.

    4.Delivery
    Samples in stock can be delivered within 7 days and customized samples within 30 days.Delivery date for bulk order depends on quantity.

    5.Feedback and after-sale service
    Any problems in using are welcome to be informed !Our technician will give you professional advise.We will give you free maintenance within 24 months if the flaws are the result of production.

    *COMMON PROBLEM

    Q1.Do you have online contact info?
    A1:Yes, Skype , ,Link  is

    Q2.How can we know the product quality?
    A2:We suggest you to order a sample.Also, you can send us email for detail photos for checking if you cannot
    Get enough information in the product page.

    Q3.Can we have free sample?
    A3:Yes sure, but please pay the shipping cost by youself.

    Q4.Is this your final price?May i have the discount?
    A4:Our price is the factory price, and if your quantity is larger, we will allow the discount for you.

    Q5.Can we visit your factory?
    A5:Yes welcome warmly.Our address is

    Q6:Do you have any certificates?
    A6:Yes, we have.All the motors have been approved by CE and Rohs.

    Q7:Do you offer OEM AND ODM service?
    A7:Yes.We can  supply OEM andmake customized design for any specific application.

    Q8:What’s the delivery time  ?
    A8:Except special order.For samples usually  10-14 working days .For batch order .Usually 20-25days.

     

    Screws and Screw Shafts

    A screw is a mechanical device that holds objects together. Screws are usually forged or machined. They are also used in screw jacks and press-fitted vises. Their self-locking properties make them a popular choice in many different industries. Here are some of the benefits of screws and how they work. Also read about their self-locking properties. The following information will help you choose the right screw for your application.

    Machined screw shaft

    A machined screw shaft can be made of various materials, depending on the application. Screw shafts can be made from stainless steel, brass, bronze, titanium, or iron. Most manufacturers use high-precision CNC machines or lathes to manufacture these products. These products come in many sizes and shapes, and they have varying applications. Different materials are used for different sizes and shapes. Here are some examples of what you can use these screws for:
    Screws are widely used in many applications. One of the most common uses is in holding objects together. This type of fastener is used in screw jacks, vises, and screw presses. The thread pitch of a screw can vary. Generally, a smaller pitch results in greater mechanical advantage. Hence, a machined screw shaft should be sized appropriately. This ensures that your product will last for a long time.
    A machined screw shaft should be compatible with various threading systems. In general, the ASME system is used for threaded parts. The threaded hole occupies most of the shaft. The thread of the bolt occupy either part of the shaft, or the entire one. There are also alternatives to bolts, including riveting, rolling pins, and pinned shafts. These alternatives are not widely used today, but they are useful for certain niche applications.
    If you are using a ball screw, you can choose to anneal the screw shaft. To anneal the screw shaft, use a water-soaked rag as a heat barrier. You can choose from 2 different options, depending on your application. One option is to cover the screw shaft with a dust-proof enclosure. Alternatively, you can install a protective heat barrier over the screw shaft. You can also choose to cover the screw shaft with a dust-proof machine.
    If you need a smaller size, you can choose a smaller screw. It may be smaller than a quarter of an inch, but it may still be compatible with another part. The smaller ones, however, will often have a corresponding mating part. These parts are typically denominated by their ANSI numerical size designation, which does not indicate threads-per-inch. There is an industry standard for screw sizes that is a little easier to understand.
    screwshaft

    Ball screw nut

    When choosing a Ball screw nut for a screw shaft, it is important to consider the critical speed of the machine. This value excites the natural frequency of a screw and determines how fast it can be turned. In other words, it varies with the screw diameter and unsupported length. It also depends on the screw shaft’s diameter and end fixity. Depending on the application, the nut can be run at a maximum speed of about 80% of its theoretical critical speed.
    The inner return of a ball nut is a cross-over deflector that forces the balls to climb over the crest of the screw. In 1 revolution of the screw, a ball will cross over the nut crest to return to the screw. Similarly, the outer circuit is a circular shape. Both flanges have 1 contact point on the ball shaft, and the nut is connected to the screw shaft by a screw.
    The accuracy of ball screws depends on several factors, including the manufacturing precision of the ball grooves, the compactness of the assembly, and the set-up precision of the nut. Depending on the application, the lead accuracy of a ball screw nut may vary significantly. To improve lead accuracy, preloading, and lubrication are important. Ewellix ball screw assembly specialists can help you determine the best option for your application.
    A ball screw nut should be preloaded prior to installation in order to achieve the expected service life. The smallest amount of preload required can reduce a ball screw’s calculated life by as much as 90 percent. Using a lubricant of a standard grade is recommended. Some lubricants contain additives. Using grease or oil in place of oil can prolong the life of the screw.
    A ball screw nut is a type of threaded nut that is used in a number of different applications. It works similar to a ball bearing in that it contains hardened steel balls that move along a series of inclined races. When choosing a ball screw nut, engineers should consider the following factors: speed, life span, mounting, and lubrication. In addition, there are other considerations, such as the environment in which the screw is used.
    screwshaft

    Self-locking property of screw shaft

    A self-locking screw is 1 that is capable of rotating without the use of a lock washer or bolt. This property is dependent on a number of factors, but 1 of them is the pitch angle of the thread. A screw with a small pitch angle is less likely to self-lock, while a large pitch angle is more likely to spontaneously rotate. The limiting angle of a self-locking thread can be calculated by calculating the torque Mkdw at which the screw is first released.
    The pitch angle of the screw’s threads and its coefficient of friction determine the self-locking function of the screw. Other factors that affect its self-locking function include environmental conditions, high or low temperature, and vibration. Self-locking screws are often used in single-line applications and are limited by the size of their pitch. Therefore, the self-locking property of the screw shaft depends on the specific application.
    The self-locking feature of a screw is an important factor. If a screw is not in a state of motion, it can be a dangerous or unusable machine. The self-locking property of a screw is critical in many applications, from corkscrews to threaded pipe joints. Screws are also used as power linkages, although their use is rarely necessary for high-power operations. In the archimedes’ screw, for example, the blades of the screw rotate around an axis. A screw conveyor uses a rotating helical chamber to move materials. A micrometer uses a precision-calibrated screw to measure length.
    Self-locking screws are commonly used in lead screw technology. Their pitch and coefficient of friction are important factors in determining the self-locking property of screws. This property is advantageous in many applications because it eliminates the need for a costly brake. Its self-locking property means that the screw will be secure without requiring a special kind of force or torque. There are many other factors that contribute to the self-locking property of a screw, but this is the most common factor.
    Screws with right-hand threads have threads that angle up to the right. The opposite is true for left-hand screws. While turning a screw counter-clockwise will loosen it, a right-handed person will use a right-handed thumb-up to turn it. Similarly, a left-handed person will use their thumb to turn a screw counter-clockwise. And vice versa.
    screwshaft

    Materials used to manufacture screw shaft

    Many materials are commonly used to manufacture screw shafts. The most common are steel, stainless steel, brass, bronze, and titanium. These materials have advantages and disadvantages that make them good candidates for screw production. Some screw types are also made of copper to fight corrosion and ensure durability over time. Other materials include nylon, Teflon, and aluminum. Brass screws are lightweight and have aesthetic appeal. The choice of material for a screw shaft depends on the use it will be made for.
    Shafts are typically produced using 3 steps. Screws are manufactured from large coils, wire, or round bar stock. After these are produced, the blanks are cut to the appropriate length and cold headed. This cold working process pressudes features into the screw head. More complicated screw shapes may require 2 heading processes to achieve the desired shape. The process is very precise and accurate, so it is an ideal choice for screw manufacturing.
    The type of material used to manufacture a screw shaft is crucial for the function it will serve. The type of material chosen will depend on where the screw is being used. If the screw is for an indoor project, you can opt for a cheaper, low-tech screw. But if the screw is for an outdoor project, you’ll need to use a specific type of screw. This is because outdoor screws will be exposed to humidity and temperature changes. Some screws may even be coated with a protective coating to protect them from the elements.
    Screws can also be self-threading and self-tapping. The self-threading or self-tapping screw creates a complementary helix within the material. Other screws are made with a thread which cuts into the material it fastens. Other types of screws create a helical groove on softer material to provide compression. The most common uses of a screw include holding 2 components together.
    There are many types of bolts available. Some are more expensive than others, but they are generally more resistant to corrosion. They can also be made from stainless steel or aluminum. But they require high-strength materials. If you’re wondering what screws are, consider this article. There are tons of options available for screw shaft manufacturing. You’ll be surprised how versatile they can be! The choice is yours, and you can be confident that you’ll find the screw shaft that will best fit your application.

    China best NEMA 17 2 Phase 42mm Threaded Rod 8mm Diameter External Lead Screw Stepper Motor (42SHD0410-300NT)   with Good qualityChina best NEMA 17 2 Phase 42mm Threaded Rod 8mm Diameter External Lead Screw Stepper Motor (42SHD0410-300NT)   with Good quality

    China high quality China Tr8 Threaded Rod NEMA 17 Ball Lead Screw Stepping Motor with Great quality

    Product Description

    China Tr8 threaded rod NEMA 17 ball lead screw stepping motor

    1. Phase: 2
    2. Step Angle: 1.8 degree
    3. Holding Torque: 28-52N.cm
    4. Motor Length: 34-48MM
    5. Motor Weight: 220-350g
    6. Lead Wire: 4
    7. Screw Dia.: Tr6.35, Tr8
    8. Screw Length: Customized from 100-300mm

    Note: The data sheet is only for reference, We can make the motor according to your requirement after Evaluation

    Company Capacity

    HangZhou CZPT Co. Ltd is a manufacturer and exporter of various of motors with over 10 years experience.
    Our product ranges include:
    1) DC Brush motor: 6-130mm diameter, 0.01-1000W output power
    2) DC Spur Gear Motor: 12-110mm diameter, 0.1-300W output power
    3) DC Planeary Gear Motor: 10-82mm diameter, 0.1-100W output power 
    4) Brushless DC Motor: 28-110mm, 5-1500W output power 
    5) Stepper Motor: NEMA 08 to NEMA 43, Can with gearbox and lead screw
    6) Servo Motor: 42mm to 130mm diameter, 50-4000w 
    7) AC Gear Motor: 49 to 100mm diameter, 6-140 output power 

    1. Production Line:

    2. Testing Equipment:

    3. Certificates:

    4. Customer Visits:

    6. FAQ:

    Q: What’s your main products?
    A:We currently produce Brushed Dc Motors, Brushed Dc gear Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors and Ac Motors etc. You can check the specifications for above motors on our website and you can email us to recommend needed motors per your specification too.

    Q:How to select a suitable motor?
    A:If you have motor pictures or drawings to show us, or you have detailed specs like voltage, speed, torque, motor size, working mode of the motor, needed life time and noise level etc, please do not hesitate to let us know, then we can recommend suitable motor per your request accordingly.

    Q: Do you have a customized service for your standard motors?
    A:Yes, we can customize per your request for the voltage, speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.

    Q:Do you have individual design service for motors?
    A:Yes, we would like to design motors individually for our customers, but it may need some CZPT charge and design charge. 

    Q:Can I have samples for testing first?
    A:Yes, definitely you can. After confirmed the needed motor specs, we will quote and provide a proforma invoice for samples, once we get the payment, we will get a PASS from our account department to proceed samples accordingly.

    Q:How do you make sure motor quality?
    A:We have our own inspection procedures: for incoming materials, we have signed sample and drawing to make sure qualified incoming materials; for production process, we have tour inspection in the process and final inspection to make sure qualified products before shipping.

    Q:What’s your lead time?
    A: Generally speaking, our regular standard product will need 25-30days, a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific orders

    Q:What’s your payment term?
    A:For all our new customers, we will need 40% deposite, 60% paid before shipment.

    Q:When will you reply after got my inquiries?
    A:We will respond within 24 hours once get your inquires.

    Q:How can I trust you to make sure my money is safe?
    A:We are certified by the third party SGS and we have exported to over 85 countries up to June.2017. You can check our reputation with our current customers in your country (if our customers do not mind), or you can order via alibaba to get trade assurance from alibaba to make sure your money is safe.

    Q:What’s the minimum order quantity?
    A:Our minimum order quantity depends on different motor models, please email us to check. Also, we usually do not accept personal use motor orders. 

    Q:What’s your shipping method for motors?
    A:For samples and packages less than 100kg, we usually suggest express shipping; For heavy packages, we usually suggest air shipping or sea shipping. But it all depends on our customers’ needs.

    Q:What certifications do you have?
    A:We currently have CE and ROSH certifications.

    Q:Can you send me your price list?
    A:Since we have hundreds of different products, and price varies per different specifications, we are not CZPT to offer a price list. But we can quote within 24 hours once got your inquiries to make sure you can get the price in time.

    Q:Can I visit your company?
    A:Yes, welcome to visit our company, but please let us know at least 2 weeks in advance to help us make sure no other meetings during the day you visit us. Thanks!

    Weclome contact us if you have any questions about this motor or other products!

    Screw Shaft Features Explained

    When choosing the screw shaft for your application, you should consider the features of the screws: threads, lead, pitch, helix angle, and more. You may be wondering what these features mean and how they affect the screw’s performance. This article explains the differences between these factors. The following are the features that affect the performance of screws and their properties. You can use these to make an informed decision and purchase the right screw. You can learn more about these features by reading the following articles.

    Threads

    The major diameter of a screw thread is the larger of the 2 extreme diameters. The major diameter of a screw is also known as the outside diameter. This dimension can’t be directly measured, but can be determined by measuring the distance between adjacent sides of the thread. In addition, the mean area of a screw thread is known as the pitch. The diameter of the thread and pitch line are directly proportional to the overall size of the screw.
    The threads are classified by the diameter and pitch. The major diameter of a screw shaft has the largest number of threads; the smaller diameter is called the minor diameter. The thread angle, also known as the helix angle, is measured perpendicular to the axis of the screw. The major diameter is the largest part of the screw; the minor diameter is the lower end of the screw. The thread angle is the half distance between the major and minor diameters. The minor diameter is the outer surface of the screw, while the top surface corresponds to the major diameter.
    The pitch is measured at the crest of a thread. In other words, a 16-pitch thread has a diameter of 1 sixteenth of the screw shaft’s diameter. The actual diameter is 0.03125 inches. Moreover, a large number of manufacturers use this measurement to determine the thread pitch. The pitch diameter is a critical factor in successful mating of male and female threads. So, when determining the pitch diameter, you need to check the thread pitch plate of a screw.
    screwshaft

    Lead

    In screw shaft applications, a solid, corrosion-resistant material is an important requirement. Lead screws are a robust choice, which ensure shaft direction accuracy. This material is widely used in lathes and measuring instruments. They have black oxide coatings and are suited for environments where rusting is not acceptable. These screws are also relatively inexpensive. Here are some advantages of lead screws. They are highly durable, cost-effective, and offer high reliability.
    A lead screw system may have multiple starts, or threads that run parallel to each other. The lead is the distance the nut travels along the shaft during a single revolution. The smaller the lead, the tighter the thread. The lead can also be expressed as the pitch, which is the distance between adjacent thread crests or troughs. A lead screw has a smaller pitch than a nut, and the smaller the lead, the greater its linear speed.
    When choosing lead screws, the critical speed is the maximum number of revolutions per minute. This is determined by the minor diameter of the shaft and its length. The critical speed should never be exceeded or the lead will become distorted or cracked. The recommended operational speed is around 80 percent of the evaluated critical speed. Moreover, the lead screw must be properly aligned to avoid excessive vibrations. In addition, the screw pitch must be within the design tolerance of the shaft.

    Pitch

    The pitch of a screw shaft can be viewed as the distance between the crest of a thread and the surface where the threads meet. In mathematics, the pitch is equivalent to the length of 1 wavelength. The pitch of a screw shaft also relates to the diameter of the threads. In the following, the pitch of a screw is explained. It is important to note that the pitch of a screw is not a metric measurement. In the following, we will define the 2 terms and discuss how they relate to 1 another.
    A screw’s pitch is not the same in all countries. The United Kingdom, Canada, and the United States have standardized screw threads according to the UN system. Therefore, there is a need to specify the pitch of a screw shaft when a screw is being manufactured. The standardization of pitch and diameter has also reduced the cost of screw manufacturing. Nevertheless, screw threads are still expensive. The United Kingdom, Canada, and the United States have introduced a system for the calculation of screw pitch.
    The pitch of a lead screw is the same as that of a lead screw. The diameter is 0.25 inches and the circumference is 0.79 inches. When calculating the mechanical advantage of a screw, divide the diameter by its pitch. The larger the pitch, the more threads the screw has, increasing its critical speed and stiffness. The pitch of a screw shaft is also proportional to the number of starts in the shaft.

    Helix angle

    The helix angle of a screw shaft is the angle formed between the circumference of the cylinder and its helix. Both of these angles must be equal to 90 degrees. The larger the lead angle, the smaller the helix angle. Some reference materials refer to angle B as the helix angle. However, the actual angle is derived from calculating the screw geometry. Read on for more information. Listed below are some of the differences between helix angles and lead angles.
    High helix screws have a long lead. This length reduces the number of effective turns of the screw. Because of this, fine pitch screws are usually used for small movements. A typical example is a 16-mm x 5-inch screw. Another example of a fine pitch screw is a 12x2mm screw. It is used for small moves. This type of screw has a lower lead angle than a high-helix screw.
    A screw’s helix angle refers to the relative angle of the flight of the helix to the plane of the screw axis. While screw helix angles are not often altered from the standard square pitch, they can have an effect on processing. Changing the helix angle is more common in two-stage screws, special mixing screws, and metering screws. When a screw is designed for this function, it should be able to handle the materials it is made of.
    screwshaft

    Size

    The diameter of a screw is its diameter, measured from the head to the shaft. Screw diameters are standardized by the American Society of Mechanical Engineers. The diameters of screws range from 3/50 inches to 16 inches, and more recently, fractions of an inch have been added. However, shaft diameters may vary depending on the job, so it is important to know the right size for the job. The size chart below shows the common sizes for screws.
    Screws are generally referred to by their gauge, which is the major diameter. Screws with a major diameter less than a quarter of an inch are usually labeled as #0 to #14 and larger screws are labeled as sizes in fractions of an inch. There are also decimal equivalents of each screw size. These measurements will help you choose the correct size for your project. The screws with the smaller diameters were not tested.
    In the previous section, we described the different shaft sizes and their specifications. These screw sizes are usually indicated by fractions of an inch, followed by a number of threads per inch. For example, a ten-inch screw has a shaft size of 2” with a thread pitch of 1/4″, and it has a diameter of 2 inches. This screw is welded to a two-inch Sch. 40 pipe. Alternatively, it can be welded to a 9-inch O.A.L. pipe.
    screwshaft

    Shape

    Screws come in a wide variety of sizes and shapes, from the size of a quarter to the diameter of a U.S. quarter. Screws’ main function is to hold objects together and to translate torque into linear force. The shape of a screw shaft, if it is round, is the primary characteristic used to define its use. The following chart shows how the screw shaft differs from a quarter:
    The shape of a screw shaft is determined by 2 features: its major diameter, or distance from the outer edge of the thread on 1 side to the inner smooth surface of the shaft. These are generally 2 to 16 millimeters in diameter. Screw shafts can have either a fully threaded shank or a half-threaded shank, with the latter providing better stability. Regardless of whether the screw shaft is round or domed, it is important to understand the different characteristics of a screw before attempting to install it into a project.
    The screw shaft’s diameter is also important to its application. The ball circle diameter refers to the distance between the center of 2 opposite balls in contact with the grooves. The root diameter, on the other hand, refers to the distance between the bottommost grooves of the screw shaft. These are the 2 main measurements that define the screw’s overall size. Pitch and nominal diameter are important measurements for a screw’s performance in a particular application.

    Lubrication

    In most cases, lubrication of a screw shaft is accomplished with grease. Grease is made up of mineral or synthetic oil, thickening agent, and additives. The thickening agent can be a variety of different substances, including lithium, bentonite, aluminum, and barium complexes. A common classification for lubricating grease is NLGI Grade. While this may not be necessary when specifying the type of grease to use for a particular application, it is a useful qualitative measure.
    When selecting a lubricant for a screw shaft, the operating temperature and the speed of the shaft determine the type of oil to use. Too much oil can result in heat buildup, while too little can lead to excessive wear and friction. The proper lubrication of a screw shaft directly affects the temperature rise of a ball screw, and the life of the assembly. To ensure the proper lubrication, follow the guidelines below.
    Ideally, a low lubrication level is appropriate for medium-sized feed stuff factories. High lubrication level is appropriate for larger feed stuff factories. However, in low-speed applications, the lubrication level should be sufficiently high to ensure that the screws run freely. This is the only way to reduce friction and ensure the longest life possible. Lubrication of screw shafts is an important consideration for any screw.

    China high quality China Tr8 Threaded Rod NEMA 17 Ball Lead Screw Stepping Motor   with Great qualityChina high quality China Tr8 Threaded Rod NEMA 17 Ball Lead Screw Stepping Motor   with Great quality